2.9kW Single-Phase Switched Automatic

Transfer Switch PDU, 2 120V L5-30P Inputs, 24 5-

15/20R & 1 L5-30R Outputs, 2U, TAA

MODEL NUMBER: PDUMH30ATNET

Features

120V 30A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched outlets (Agency

de-rated to 24A)

q

ATS features provide redundant power for critical network equipment with a single input power cord

q

Switched PDU features enable programmable or real-time power control of individual outlets via built-in

network interface

q

Visual meter reports output amp and kW power consumption, plus voltage and temperature/humidity

data with optional EnviroSense2 sensor

q

25 switched outlets (24 5-15/20R & 1 L5-30R)

q

2U horizontal rackmount form factor; 11.9 in. / 30.2cm depth

q

Set of two 10-ft. / (3.05 m) NEMA L5-30P input line cords enable separate PRIMARY and

SECONDARY input connections

q

ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails

or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable

until power on the primary input is restored and stable

q

Highly reliable solid-state switching enables fast 1-5 millisecond trasfer between primary and secondary

inputs

q

ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS

and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-

UPS environment, the primary input cable must be supported by an online UPS with zero transfer time

similar to Tripp Lite SmartOnline series)

q

Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate

q

Highlights

Single phase 30A 120V Auto

Transfer Switch / ATS PDU;

Highly reliable Solid State

Switching

q

Enables redundant A/B power

option for non-redundant

network devices

q

Built-in LX Platform Network

Interface

q

2U rackmount, 2 L5-30P inputs,

25 switched outlets (24 5-

15/20R, 1 L5-30R)

q

Individually switched outlets and

built-in network interface

enables remote control and

monitoring

q

Digital meter reports voltage,

kW load level and output

amperage in 4 load segments

q

TAA Compliant

q

To enable the Auto Probe

feature, this product requires LX

firmware update 15.5.2 or later

to be installed

q

Package Includes

ATS / Switched PDU with two

L5-30P inputs

q

Installable 2U mounting

brackets

q

Operating manual

q

1 / 4