| 数据搜索系统,热门电子元器件搜索 |
|
ST25R95 数据表(PDF) 41 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25R95 数据表(HTML) 41 Page - STMicroelectronics |
|
41 / 61 page ![]() 5.12 AC filter command (0x0D) description This command activates/deactivates the anti-collision filter in Type A card emulation mode. The following tables define the command and response fields depending on the AC filter command length. Table 39. AC filter command description (Command <Len> > 0x02) Direction Data Comments Example Host to ST25R95 0D Command code General case (LEN ≠ 0x00, 0x01 or 0x02) >>>0D0B440320880251744AEF2280 Activate filter for 2-cascade anti-collision Note that the command length can be 7, 11 or 15 bytes depending on UID length: 7: for 1-cascade level filter 11: for 2-cascade levels filter 15: for 3-cascade levels filter All other values greater than 2 will result in an ‘Invalid command length’ error. *** Special cases of command *** LEN = 0x00 >>>0x0D00 De-activate AC Filter (LEN = 0x00) <<< 0x0001XX0000 AC Filter is successfully deactivated (See Table 40. state when behaving as ISO/IEC 14443-A tag LEN = 0x01 >>> 0x0D01XX - Set AC state (see table below) <<< 0x0000 AC state successfully set LEN = 0x02 >>> 0x0D020000 - Returns AC state without deactivating filter <<< 0x0001XX AC state (See Table 40. state when behaving as ISO/IEC 14443-A tag) <Len> Length of data <ATQA> (2 bytes) Unused and proprietary bits of SAK (protocol bits will be handled by firmware) <SAK> Unused and proprietary bits of SAK (protocol bits will be handled by firmware) <UID part 1> UID for cascade level 1 (Mandatory) <UID part 2> UID for cascade level 2 (Optional) <UID part 3> UID for cascade level 3 (Optional) ST25R95 to Host 00 Result code AC Filter is successfully activated. <<<0x0000 Set State: >>>> 0D0101 <<<< 0000 00 Length of data ST25R95 to Host 82 Error code <<<0x8200 Invalid command length 00 Length of data ST25R95 to Host 00 Result code Get state >>> 0D020000 <<< 000101 Deactivate AC Filter: >>> 0D00 <<< 000101 01 Length of data <state> AC state (See Table 40. state when behaving as ISO/IEC 14443-A tag) ST25R95 AC filter command (0x0D) description DS12807 - Rev 4 page 41/61 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |