| 数据搜索系统,热门电子元器件搜索 |
|
AD8271ARMZ-R7 数据表(PDF) 4 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD8271ARMZ-R7 数据表(HTML) 4 Page - Analog Devices |
|
4 / 20 page ![]() AD8271 Rev. 0 | Page 4 of 20 VS = ±5 to ±15 V, VREF = 0 V, G = ½, RLOAD = 2 kΩ, TA = 25°C, specifications referred to input (RTI), unless otherwise noted. Table 3. B Grade A Grade Parameter Conditions Min Typ Max Min Typ Max Unit DYNAMIC PERFORMANCE Bandwidth 20 20 MHz Slew Rate 30 30 V/μs Settling Time to 0.01% VS = ±15, 10 V step on output 700 800 700 800 ns VS = ±5, 5 V step on output 550 650 550 650 ns Settling Time to 0.001% VS = ±15, 10 V step on output 750 900 750 900 ns VS = ±5, 5 V step on output 600 750 600 750 ns NOISE/DISTORTION Harmonic Distortion + Noise VS = ±15, f = 1 kHz, VOUT = 10 V p-p, RLOAD = 600 Ω 74 74 dB VS = ±5, f = 1 kHz, VOUT = 10 V p-p, RLOAD = 600 Ω 101 101 dB Voltage Noise1 f = 0.1 Hz to 10 Hz 2 2 μV p-p f = 1 kHz 52 52 nV/√Hz GAIN Gain Error VOUT = 10 V p-p 0.04 0.08 % Gain Drift TA = −40°C to +85°C 0.5 2 1 10 ppm/°C Gain Nonlinearity VOUT = 10 V p-p, RLOAD = 10 kΩ, 2 kΩ, 600 Ω 200 200 ppm INPUT CHARACTERISTICS Offset2 450 1000 450 1500 μV Average Temperature Drift TA = −40°C to +85°C 3 3 μV/°C Common-Mode Rejection Ratio DC to 1 kHz 74 86 70 86 dB Power Supply Rejection Ratio 2 10 2 10 μV/V Input Voltage Range3 −VS − 0.4 +VS + 0.4 −VS − 0.4 +VS + 0.4 V Common-Mode Resistance4 7.5 7.5 kΩ Bias Current Inputs grounded 500 500 nA OUTPUT CHARACTERISTICS Output Swing VS = ±15 −13.8 +13.8 −13.8 +13.8 V VS = ±15, TA = −40°C to +85°C −13.7 +13.7 −13.7 +13.7 V VS = ±5 −4 +4 −4 +4 V VS = ±5, TA = −40°C to +85°C −3.9 +3.9 −3.9 +3.9 V Short-Circuit Current Limit Sourcing 100 100 mA Sinking 60 60 mA POWER SUPPLY Supply Current 2.3 2.6 2.3 2.6 mA TA = −40°C to +85°C 3.2 3.2 mA 1 Includes amplifier voltage and current noise, as well as noise of internal resistors. 2 Includes input bias and offset errors. 3 At voltages beyond the rails, internal ESD diodes begin to turn on. In some configurations, the input voltage range may be limited by the internal op amp (see the section for details). Input Voltage Range 4 Internal resistors, trimmed to be ratio matched, have ±20% absolute accuracy. Common-mode resistance was calculated with both inputs in parallel. The common- mode impedance at only one input is 2× the resistance listed. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |