USB5744SLASH2G datasheet(23/51 Pages) MICROCHIP

23 / 51 page

 2022 Microchip Technology Inc. and its subsidiaries

DS00001855L-page 23

USB5744

6.0

DEVICE CONFIGURATION

The device supports a large number of features (some mutually exclusive), and must be configured in order to correctly

function when attached to a USB host controller. The hub can be configured either internally or externally depending on

the implemented interface.

Microchip provides a comprehensive software programming tool, Pro-Touch, for configuring the USB5744 functions,

registers and OTP memory. All configuration is to be performed via the Pro-Touch programming tool. For additional infor-

mation on the Pro-Touch programming tool, refer to the Software Libraries within the Microchip USB5744 product page

at www.microchip.com/USB5744.

6.1

Customer Accessible Functions

The following USB or SMBus accessible functions are available to the customer via the Pro-Touch Programming Tool.

6.1.1

USB ACCESSIBLE FUNCTIONS

6.1.1.1

OTP Access over USB

The OTP ROM in the device is accessible via the USB bus. All OTP parameters can be modified to the USB Host. The

OTP operates in Single Ended mode. For more information, refer to the Microchip USB5744 product page and SDK at

www.microchip.com/USB5744

6.1.1.2

Battery Charging Access over USB

The Battery charging behavior of the device can be dynamically changed by the USB Host when something other than

the preprogrammed or OTP programmed behavior is desired. For more information, refer to the Microchip USB5744

product page and SDK at www.microchip.com/USB5744

6.1.2

SMBUS ACCESSIBLE FUNCTIONS

OTP access and configuration of specific device functions are possible via the USB5744 SMBus. All OTP parameters

can be modified via the SMBus Host. The OTP can be programmed to operate in Single-Ended, Differential, Redundant,

or Differential Redundant mode, depending on the level of reliability required. For more information, refer to AN1903 -

“Configuration Options for the USB5734 and USB5744” application note at www.microchip.com/AN1903.

Note:

Device configuration straps and programmable pins are detailed in Section 3.4, "Configuration Straps and

Programmable Functions," on page 16.

Refer to Section 7.0, "Device Interfaces" for detailed information on each device interface.

Note:

For additional programming details, refer to the Pro-Touch programming tool.

USB5744/2G 数据表(PDF) 23 Page - Microchip Technology

USB5744/2G 数据表(HTML) 23 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

数据表下载