| 数据搜索系统,热门电子元器件搜索 |
|
AX-SFEU-API 数据表(PDF) 1 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AX-SFEU-API 数据表(HTML) 1 Page - ON Semiconductor |
|
1 / 22 page ![]() © Semiconductor Components Industries, LLC, 2017 April, 2018 − Rev. 8 1 Publication Order Number: AX−SFEU/D AX-SFEU, AX-SFEU-API Ultra-Low Power, AT Command / API Controlled, Sigfox) Compliant Transceiver IC for Up-Link and Down-Link OVERVIEW Circuit Description AX−SFEU and AX−SFEU−API are ultra−low power single chip solutions for a node on the Sigfox network with both up− and down−link functionality. The AX−SFEU chip is delivered fully ready for operation and contains all the necessary firmware to transmit and receive data from the Sigfox network in Europe. It connects to the customer product using a logic level RS232 UART. AT commands are used to send frames and configure radio parameters. The AX−SFEU−API variant is intended for customers wishing to write their own application software based on the AX−SF−LIB−1−GEVK library. Features Functionality and Ecosystem • Sigfox up−link and down−link functionality controlled by AT commands or API • The AX−SFEU and AX−SF−API ICs are part of a whole development and product ecosystem available from ON Semiconductor for any Sigfox requirement. Other parts of the ecosystem include ♦ Ready to go development kit DVK−SFEU−[API]−1−GEVK including a 2 year Sigfox subscription ♦ Sigfox Ready® certified reference design for the AX−SFEU and AX−SFEU−API ICs ♦ AX−SF10−MINI21−868−B1 and AX−SF10−ANT21−868−B1, Sigfox compliant SMT modules based on AX−SFEU with 50 W pads or chip antenna. Not available for AX−SFEU−API General Features • QFN40 5 mm x 7 mm package • Supply range 2.1 − 3.6 V • −40°C to 85°C • Temperature sensor • Supply voltage measurements • 10 GPIO pins ♦ 4 GPIO pins with selectable voltage measure functionality, differential (1 V or 10 V range) or single ended (1 V range) with 10 bit resolution ♦ 2 GPIO pins with selectable sigma delta DAC output functionality ♦ 2 GPIO pins with selectable output clock ♦ 3 GPIO pins selectable as SPI master interface ♦ Integrated RX/TX switching with differential antenna pins Power Consumption • Ultra−low Power Consumption: ♦ Charge required to send a Sigfox OOB packet at 14 dBm output power: 0.28 C ♦ Deep Sleep mode current: 100 nA ♦ Sleep mode current: 1.3 mA ♦ Standby mode current: 0.5 mA ♦ Continuous radio RX−mode at 869.525 MHz : 10 mA ♦ Continuous radio TX−mode at 868.130 MHz 19 mA @ 0 dBm 49 mA @ 14 dBm High Performance Narrow−band Sigfox RF Transceiver • Receiver ♦ Carrier frequency 869.525 MHz ♦ Data−rate 600 bps FSK ♦ Sensitivity −126 dBm @ 600 bps, 869.525 MHz, GFSK ♦ 0 dBm maximum input power • Transmitter ♦ Carrier frequency 868.13 MHz ♦ Data−rate 100 bps PSK ♦ High efficiency, high linearity integrated power amplifier ♦ Maximum output power 14 dBm ♦ Power level programmable in 1 dBm steps Applications Sigfox networks up−link and down−link. www.onsemi.com |
类似零件编号 - AX-SFEU-API |
|
类似说明 - AX-SFEU-API |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |