ADP5587ACPZ-1-R7 datasheet(13/24 Pages) AD

13 / 24 page

Data Sheet

ADP5587

Rev. E | Page 13 of 24

275 Microsecond Interrupt Configuration

The ADP5587 gives the user the flexibility of deasserting the

interrupt for 275 μs while there is a pending event. When the

INT_CFG bit in Register 0x01 is set, any attempt to clear the

interrupt bit while the interrupt pin is already asserted results

in a 275 μs deassertion. When the INT_CFG bit is cleared, the

processor interrupt remains asserted if the host tries to clear

the interrupt. This feature is particularly useful for software

development and edge triggering applications.

Debouncing

The ADP5587 has a 275 μs debounce time for GPIOs configured

as GPIs and rows in keypad scanning mode. The reset line

always has a 275 μs debounce time.

General-Purpose Outputs (GPOs)

The ADP5587 allows the user to configure all or some of its

GPIOs as GPOs. These GPOs can be used as extra enables for

the host processor or simply as trigger outputs. When configured

as an output (GPO), a digital buffer drives the pin to 0 V for a 0

and to VCC for a 1. To set any GPIO as a GPO, make sure that

the corresponding bits in Register 0x1D through Register 0x1F are

set for GPIO mode; then use Register 0x23 through Register 0x25

to set the corresponding bits for GPO mode.

Power-On Reset

For built-in power-up initialization for applications lacking a

power-on reset signal, a reset pin, RST, allows the user to reset

the registers to default values in the event of a brownout or

other reset condition.

Table 14. Device Configuration

Keypad

GPIO

Matrix

Active Pins

Number of Keys

Available GPIO

Number of GPIOs

10 × 8

C0 to C9, R0 to R7

8 × 8

C0 to C7, R0 to R7

C8, C9

8 × 7

C0 to C7, R0 to R6

R7, C8, C9

8 × 6

C0 to C7, R0 to R5

R6, R7, C8, C9

8 × 5

C0 to C7, R0 to R4

R5 to R7, C8, C9

7 × 7

C0 to C6, R0 to R6

R7, C7 to C9

7 × 6

C0 to C6, R0 to R5

R6, R7, C7 to C9

7 × 5

C0 to C6, R0 to R4

R5 to R7, C7 to C9

6 × 6

C0 to C5, R0 to R5

R6, R7, C6 to C9

6 × 5

C0 to C5, R0 to R4

R5 to R7, C6 to C9

6 × 4

C0 to C5, R0 to R3

R4 to R7, C6 to C9

…

0 × 0

None

R0 to R7, C0 to C9

ADP5587ACPZ-1-R7 数据表(PDF) 13 Page - Analog Devices

ADP5587ACPZ-1-R7 数据表(HTML) 13 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

数据表下载