5

Radiations

Total ionizing dose (TID):

For the qualification, the product is characterized in TID as per MIL-STD-883 TM 1019 up to 50 krad (Si) on 5

biased parts at high dose rate, such a rate being the worst condition for a pure CMOS technology.

All parameters provided in Table 4. Electrical characteristics apply to both pre- and post-irradiation.

Each new production lot is tested at high dose rate as per MIL-STD-883 TM 1019 on 5 parts.

Heavy-ions:

Single event latchup (SEL) is characterized at 125 °C at a LET of 62.5 MeV.cm2/mg. The test shows the product

is immune to heavy ions at this LET. Heavy-ion trials are performed on qualification lots only.

The results in radiation are summarized in Table 5 as follows:

Symbol

Characteristics

Value

TID

•

High-dose rate (40 krad (Si) / h)

•

Temperature: 25 °C

•

Performed on 5 biased parts

Within Table 4 up to 50 krad (Si)

SEL

•

LET: 62.5 MeV.cm2/mg (Xenon ions)

•

Temperature: 125 °C

•

•

Normal incidence

Immune to SEL up to

1. A total ionizing dose (TID) of 50 krad(Si) is equivalent to 500 Gy(Si), (1 gray = 100 rad).

2. SEL: single event latch-up.

LEOAC00

Radiations

DS13639 - Rev 4

page 7/17