2

Maximum ratings and operating conditions

Symbol

Parameter

Value

Unit

VCC(1)

Maximum power supply between VCC and GND

-0.5 to 7

V

VIN

DC input voltage range

-0.5 to VCC+0.5 (and 7 V max.)

V

VOUT

DC output voltage range

-0.5 to VCC+0.5 (and 7 V max.)

V

IK

I/O clamp diode current

+/-20

mA

Maximum temperature storage

-65 to 150

°C

Maximum junction temperature

+150

°C

Rth(3)

Junction-to-ambient thermal resistance (Ɵja)

80

°C/W

Junction-to-case thermal resistance (Ɵjc)

17

°C/W

ESD

HBM (human body model)

2 k

V

CDM (charged device model)

1 k

1. All voltages, except differential I/O bus voltage, are with respect to the network ground terminal.

2. Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions as

per the method 5004 of MIL-STD-883.

3. Short-circuits can cause excessive heating. Destructive dissipation can result from short-circuits on the amplifiers.

Note:

Absolute maximum ratings are those values beyond which damage to the device may occur. Functional

operation under these conditions is not implied. All values are referred to GND.

Symbol

Parameter

Min.

Max.

Unit

VCC

Analog supply voltage

2

6

V

VIN

Input voltage range

0

VCC

V

VOUT

Output voltage range

0

VCC

V

Ambient temperature range

-40

+125

°C

Note:

All unused inputs must be held at VCC or GND to ensure proper device operation.

LEOAC00

Maximum ratings and operating conditions

DS13639 - Rev 4

page 3/17