DFN10 3 x 3

Features

•

Half-duplex RS485 transceiver

•

1.65 V to 3.6 V supply for data and enable signals

•

3 V to 3.6 V supply for bus supply

•

High speed: up to 20 Mbps data rate

•

Low speed selected by SLR pin : 250 kbps

•

Up to 128 transceivers on the bus @ 125 °C

•

Fail safe receiver (bus open, idle and shorted)

•

Thermal shutdown protection

•

Low quiescent current in shutdown mode

•

Extended temperature range : -40 °C to +125 °C

•

Available in industry standard DFN10

•

Bus-pin protection more than:

–

±4 kV HBM protection

–

±8 kV IEC61000-4-2 contact discharge

–

±16 kV IEC61000-4-2 air discharge

–

Compliant IEC61000-4-4 fast transient burst Class B

Description

The STR485E is a low power differential line transceiver for data transmission

standard RS485 applications in half-duplex mode. Data and enable signals are

compatible with 1.8 V or 3.3 V supplies.

Two speeds are selectable through SLR pin: fast data rate up to 20 Mbps or slow

data rate for extended cable running to 250 kbps.

Excessive power dissipation caused by bus contention or faults is prevented by

thermal shutdown circuit that forces the driver outputs into a high impedance state.

The receiver has a fail-safe feature, which guarantees a high output state when the

inputs are left open, shorted or idle.

Product status link

STR485E

3.3 V RS485 compatible with 1.8 V I/Os and selectable speed 20 Mbps or 250

kbps

STR485E

Datasheet

DS13051 - Rev 3 - July 2020

For further information contact your local STMicroelectronics sales office.

www.st.com