| 数据搜索系统,热门电子元器件搜索 |
|
TSC2010H 数据表(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TSC2010H 数据表(HTML) 28 Page - STMicroelectronics |
|
28 / 50 page ![]() • Bidirectional operation Bidirectional mode of operation allows the device to measure currents through a shunt resistor in two directions. The output reference can be set anywhere within the power supply range. If the output common mode voltage is set at mid-range, the full scale current measurement range is equal in both directions. This is achieved by connecting one VREF pin to Vcc and the other VREF pin to Gnd as described by Figure 3. It can also be done by connecting both VREF pins to Vcc / 2 voltage as described by Figure 4. In case the current measurement is not equal in both directions, the user can set the output in a non-symmetrical configuration, adjusting Vref according to the user's needs. • Split supply Figure 60. Split supply The biggest advantage of this configuration is that the TSC2011H can be used in bidirectional mode with an output common mode voltage set at the middle of scale, with an accuracy of 0.1%, without any added external component or power supply. This configuration creates a midscale offset ratiometric to the power supply. • External Figure 61. External supply TSC2010H, TSC2011H, TSC2012H Unidirectional / bidirectional operation DS13791 - Rev 1 page 28/50 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |