2

Absolute maximum ratings

Table 3. Absolute maximum ratings

Symbol

Parameters(1)

Value

Unit

VDD

Positive supply voltage

-0.3 to 6.0

V

VSS

Negative supply voltage

-13 to 0.3

V

VDD - VSS

Total supply voltage

-0.3 to 16

V

VINH

DC inhibit pin(2)

-0.3 to VDD +0.3

V

VSEL

DC control input voltage(2)

-0.3 to VDD +0.3

V

VS

DC input voltage (pins iS1, iS2)(2)

VSS -0.3 to VDD +0.3

V

VD

DC output voltage (pin Di)(2)

VSS -0.3 to VDD +0.3

V

IINH

DC input diode current on INH pin(2)

±10

mA

ISEL

DC input diode current on SELi pins(2)

±10

mA

IIK

DC input diode current (pins iS1, iS2)(2)

±10

mA

IOK

DC output diode current (pin Di)(2)

±10

mA

IO

DC output current (pins iS1, iS2, Di), Top = 25 °C

±150

mA

IOP

Peak output current (pins iS1, iS2, Di)

1 ms pulse, 10% duty cycle, Top = 25 °C

±450

mA

Tstg

Storage temperature

-65 to +150

°C

Tj

Maximum junction temperature

150

°C

Rth-ja

Thermal resistance junction-to-ambient(3)

45

°C / W

Pd

Continuous power dissipation(4)

Top = 70 °C

1.78

W

ESD

HBM: human body model(5)

4

kV

CDM: charged device model(6)

1.5

kV

1. All voltage values are with respect to ground, unless otherwise specified.

2. Voltage and current limited whichever occurs first.

3. Rth-ja is a typical value, obtained with PCB according to the standard JEDEC 2s2p without vias.

4. The maximum continuous power dissipation is: (150 °C - Top)/Rth-ja. In each switch, the power dissipation is RON*I2, where

I is the current through the switch. The overall power dissipation is the sum of the power dissipation in each switch. For

example, if Top is 110 °C, considering the max. RON at the power supply voltage used is 14 Ω, and that you want to

source the maximum of current in 3 switches at the same time while the fourth is unused, then this maximum current is :

Tjmax−Top

3*Ron*Rtℎja= 150−110

3*14*45 =145mA

In any case, the DC output current condition should be satisfied.

5. Human body model: HBM test according to the standard ESDA/JEDEC JS-001-2017.

6. Charged device model: CDM test according to the standard AEC-Q100-011.

STG1218

Absolute maximum ratings

DS13729 - Rev 3

page 4/29