21

Integrated

Circuit

Systems, Inc.

ICS951402

Advance Information

0660—05/05/05

The impact of asserting the PCI_STOP# signal will be the following. All PCI and stoppable PCI_F clocks will latch low in their

next high to low transition. The PCI_STOP# setup time tsu is 10 ns, for transitions to be recognized by the next rising edge.

PCI_STOP#

PCI_F 33MHz

PCI 33MHz

tsu

Assertion of PCI_STOP# Waveforms

PCI_STOP# - Assertion (transition from logic "1" to logic "0")

CPU_STOP#

CPUT

CPUC

The impact of asserting the CPU_STOP# pin is all CPU outputs that are set in the I

assertion of CPU_STOP# are to be stopped after their next transition following the two CPU clock edge sampling as shown.

The final state of the stopped CPU signals is CPUT=High and CPUC=Low. There is to be no change to the output drive current

values. The CPUT will be driven high with a current value equal to (MULTSEL0) X (I REF), the CPUC signal will not be driven.

CPU_STOP# - Assertion (transition from logic "1" to logic "0")

Assertion of CPU_STOP# Waveforms