MHP270 Screening Standard & ES

page 1 of 1

TEST

MHP270

MHP270

STANDARD

/ES

Pre-cap Inspection

Method 2017, 2032

yes

yes

Temperature Cycle (10 times)

Method 1010, Cond. B, -55°C to 125°C, ambient

no

yes

Constant Acceleration

Method 2001, 500 g

no

yes

Burn-In

96 hours at 100°C case, typical

no

yes

Final Electrical Test MIL-PRF-38534, Group A

Subgroups 1 and 4: +25°C case

yes

yes

Hermeticity Test

Fine Leak, Method 1014, Cond. A

no

yes

Gross Leak, Method 1014, Cond. C

no

yes

yes

no

Final Visual Inspection

Method 2009

yes

yes

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

QA SCREENING: MHP270 (STANDARD & ES)

QA Screening MHP270 Standard & ES Rev B September 2005.

This revision supercedes all previous releases. All technical infor-

mation is believed to be accurate, but no responsibility is

assumed for errors or omissions. Interpoint reserves the right to

make changes in products or specifications without notice.

Copyright © 2005 Interpoint Corporation. All rights reserved.

7