ATGBICS® All rights reserved. EOE

Ref: ATGBICS_F5-UPG-SFPC-R-C_V1

Page 1 of 7

Product Datasheet

F5-UPG-SFPC-R-C

F5® Compatible 10/100/1000Base-T SFP Copper

Transceiver

Hot Pluggable, 1.25Gb/s, Cat-5 UTP Cable, 100m

FEATURES

• Up to 1.25Gb/s bi-directional data links

• 10/100/1000BASE-T auto negotiation

• Hot-pluggable SFP footprint

• Fully metallic enclosure for low EMI

• Low power dissipation

• Compact RJ-45 connector assembly

• Detailed product information in EEPROM

• +3.3V single power supply

• Access to physical layer IC via 2-wire serial bus

• 10/100/1000 BASE-T operation in host systems with SGMII interface

• Compliant with SFP MSA

• Compliant with IEEE Std 802.3TM-2002

• Compliant with FCC 47 CFR Part 15, Class B

• RoHS Compliant Products

APPLICATIONS

• 1.25 Gigabit Ethernet over Cat 5 cable

• Switch/Router to Switch/Router Link

• High speed I/O for file severs

DESCRIPTION

ATGBICS® Compatible

F5-UPG-SFPC-R-C 10/100/1000BASE-T copper SFP transceiver is high-performance,

cost-effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in

IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 10/100/1000Mbps data- rate up to 100 meters reach

over unshielded twisted-pair category 5 cable. The F5-UPG-SFPC-R-C supports 10/100/1000 Mbps full

duplex datalinks with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used

with symbol rate at 250Mbps on each pair. The F5-UPG-SFPC-R-C provides standard serial ID information

compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM

protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.