H7CC-R11D datasheet(5/66 Pages) OMRON

5 / 66 page

H7CC-A

• Equipped with a replacement time notification function.

• The white-color display further improves visibility, and the color

universal design is used. The Up/Down Keys make it easier to

use the Counter.

• Compatible with the ratings, characteristics, and functionality of

the H7CX-N.

Specifications

Ratings

*1. 1-stage preset counter and total counter functionality.

*2. Do not use the output from an inverter as the power supply.The ripple must be 20% maximum for DC power.

*3. The display is lit only when the power is ON. Nothing is displayed when power is OFF.

*4. Only reset input is performed in the H7CC-A8@, and the total count is also reset simultaneously.

H7CC-A

@ Digital Counter

Model

Item

H7CC-A8/-A11

H7CC-A

H7CC-AW

@/AU@

Classification

Preset counter

Preset counter/ tachometer

Configuration

1-stage preset counter, 1-stage preset counter with total counter (selectable)

1-stage/2-stage preset counter, total and

preset counter

*1, batch counter, dual

counter, twin counter, and tachometer

(selectable)

Ratings

Power supply voltage

• 100 to 240 VAC, 50/60 Hz

• 24 VAC, 50/60 Hz or 12 to 48 VDC

Operating voltage

fluctuation range

85% to 110% of rated supply voltage (12 to 48 VDC: 90% to 110%)

Power consumption

Approx. 6.8 VA at 100 to 240 VAC,

Approx. 5.5 VA/3.3 W at 24 VAC/12 to 48 VDC,

Mounting method

Flush mounting or surface mounting

Flush mounting

External connections

8-pin/ 11-pin socket

Screw terminals

Degree of protection

IEC IP66 for panel surface only and only when Y92S-P6 Waterproof Packing is used.

Input signals

CP1, CP2, reset, and total reset

CP1, CP2, reset 1, and reset 2

Counter

Maximum counting

speed

30 Hz (minimum pulse width: 16.7 ms) or 10 kHz (minimum pulse width: 0.05 ms) (selectable) (ON/OFF ratio 1:1)

*Common setting for CP1 and CP2

Input mode

Increment (UP), decrement (DOWN), increment/decrement (UP/DOWN A (command input), UP/DOWN B (individual inputs), or

UP/DOWN C (quadrature inputs)), UP/DOWN D (command input), UP/DOWN E (individual inputs), UP/DOWN E (quadrature inputs)

Output mode

N, F, C, R, K-1, P, Q, A, K-2, D, and L.

N, F, C, R, K-1, P, Q, A, K-2, D, L, and H.

One-shot out put time 0.01 to 99.99 s

Reset system

External (minimum reset signal width: 1 ms or 20 ms, selectable), manual, and automatic reset (internal according to C, R, P,

and Q mode operation)

Tachometer

Refer to the separate table for tachometer function ratings.

Prescaling function

Yes (0.001 to 99.999)

Decimal point adjustment

Yes (right most 3 digits)

Sensor waiting time

290 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)

Input method

No-voltage (NPN) input/voltage (PNP) input (switchable)

No-voltage inputs:

ON impedance: 1 k

Ω max. (Leakage current: 12 mA at 0 Ω) ON residual voltage: 3 V max.

OFF impedance: 100 k

Ω min.

Voltage input:

High (logic) level: 4.5 to 30 VDC

Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 k

Ω)

External power supply

12 VDC (±10%), 100 mA (except for H7CC-A8

@ models) Refer to Precautions for Correct Use on page 61 for details.

Control output

• Contact output: 3 A at 250 VAC/30 VDC, resistive load (cos

φ=1),

Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value)

• Transistor output: NPN open collector, 100 mA at 30 VDC, Residual voltage: 1.5 VDC max. (approx. 1 V),

Leakage current: 0.1 mA max.

Display

7-segment, negative transmissive LCD

Character height

Count value: 10 mm (white)

Set value: 6 mm (green)

Digits

6 digits

-99999 to 999999

(-5 digits to +6 digits)

6 digits

-99999 to 999999 (-5 digits to +6 digits),

tachometer: 0 to 999999

Memory backup

Non-volatile memory (overwrites: 100,000 times min.) that can store data for 10 years min.

Operating temperature range

-10 to 55

°C (-10 to 50°C if Counter/Tachometers are mounted side by side) (with no icing or condensation)

Storage temperature range

-25 to 70

°C (with no icing or condensation)

Operating humidity range

25% to 85%

Case color

Black (N1.5)

Attachments

---

Flush mounting adapter, waterproof packing, terminal cover

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

H7CC-R11D 数据表(PDF) 5 Page - Omron Electronics LLC

H7CC-R11D 数据表(HTML) 5 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载

链接网址

H7CC-R11D 数据表(PDF) 5 Page - Omron Electronics LLC

H7CC-R11D 数据表(HTML) 5 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表 下载

链接网址

数据表下载