LCR1210-R100F datasheet(58/59 Pages) SKYWORKS

58 / 59 page

Si32260/1

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 7, 2021

DOCUMENT CHANGE LIST:

Revision 0.1 to Revision 0.2



Corrected (reversed) EPAD1 & EPAD2 in pin

assignment drawings and pin descriptions



Added table of charge pump characteristics



Added PCLK jitter tolerance



Updated flyback dc-dc converter application

schematics and BOM



Added fixed rail dc-dc converter application

schematics and BOM



Updated ordering guide to revision B



Added package top markings information



Added PCB land pattern and soldering notes

Revision 0.2 to Revision 0.3



Added Tracking Shared Supply (TSS) mode



Added thermal resistance and maximum continuous

power dissipation



Completed Table 3 with power consumption data



Changed the name of the fixed rail dc-dc application

circuit to Tracking Shared Supply (TSS)



Corrected description of wideband operation



Changed ordering information to revision C

Revision 0.3 to Revision 0.31



Corrected IDD values in Table 3. They were showing

IDD for two channels, now only one channel as

specified.

Revision 0.31 to Revision 1.0



Corrected Jitter Tolerance to be 8 nsRMS maximum.



Updated the protection schematics for the TSS dc-

dc converter application. Pins "A" of the

TISP61089BDR are now connected to GROUND,

and the pin labeled "G" (the GATE) is now connected

to VBAT.



Updated order of data sheet elements in accordance

with new style guide SOPs.



Cosmetic updates to schematics and BOMs.



Changed test load impedance to 2.2 k

 (was listed

as 5.3 k

 or 600 



Increased SDITHRU and RST maximum leakage

current to 80 µA.



Increased absolute maximum VBAT, TIP, and RING

voltages to –142 V (was –140 V).



Added absolute maximum positive voltage specs for

TIP and RING of +0.4 V.

Revision 1.0 to Revision 1.1



Added LGA package information

Revision 1.1 to Revision 1.2



Added 6x8 mm QFN/LGA-47 package option



Added theta jb and jc values (for all package sizes)



Corrected some text formatting in the Power Supply

Characteristics table and changed the off hook line

feed current condition to 20 mA for consistency with

other ProSLIC data sheets.



Renamed EPADs to be more descriptive: HVPAD

and GNDPAD.



Updated EVB part numbers and added PMOS buck

boost dual footprint EVB.



Removed reset rise time spec from Table 7.

Revision 1.2 to Revision 1.3



Corrected 6x8 mm package land pattern diagram in

section 11.1 on p.52.

Revision 1.3 to Revision 1.4



Updated EVB part numbers.



Changed RTEST (Test Load Impedance)

specification in Table 4 to replace typical value with a

range from minimum to maximum.



Removed notes specifying voltage and temperature

conditions for Tables 2 through 9.



Replaced TSS DC-DC converter reference

schematics and bill of materials with (Low Cost

Quasi-Ćuk (LCQC) reference schematics and bill of

materials.



Removed NBA Part Numbers from Ordering Guide.



Updated 6x8 LGA package dimension tolerances:

Dimension E2 NOM changed from 3.00 to 3.10, and

Max changed from 3.05 to 3.25. Dimension E3 NOM

changed from 2.05 to 2.15, and Max from 2.10 to

2.30.



Added section listing support documentation.



Removed NBA package references throughout

document.

LCR1210-R100F 数据表(PDF) 58 Page - Skyworks Solutions Inc.

LCR1210-R100F 数据表(HTML) 58 Page - Skyworks Solutions Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

数据表下载