| 数据搜索系统,热门电子元器件搜索 |
|
VNF1048F 数据表(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
VNF1048F 数据表(HTML) 28 Page - STMicroelectronics |
|
28 / 52 page ![]() 6.6 Read mode The read mode of the device allows to read and to check the state of any registers. Incoming data are sampled on the rising edge of the serial clock (SCK), MSB first. Outgoing data are shifted out MSB first on the falling edge of the CSN pin and others on the falling edge of the serial clock (SCK). The first byte corresponds to the Global Status Byte, second, third and forth byte to the content of the addressed register.Unused bits will be always read as 0. In order to avoid inconsistency between the Global Status byte and the Status register, the Status register contents are frozen during SPI communication. Figure 11. SPI read operation 0 1 SDI SDO CSN (24 bits) Data MSB MSB LSB LSB MSB Address (8bit) Global Status Byte Command Byte LSB LSB MSB GADG1010171333PS Don’t care (24 bits) 6.7 Read and clear status command The read and clear status operation is used to clear the content of the addressed status register (see Table 33. RAM memory map (ID 12.1)). A read and clear status operation with address 0x3Fh clears all Status registers simultaneously. Incoming data are sampled on the rising edge of the serial clock (SCK), MSB first. The command byte allows to determine which register content is read and the payload bits set to 1 into the data byte determine the bits into the register which have to be cleared. Outgoing data are shifted out MSB first on the falling edge of the CSN pin and others on the falling edge of the serial clock (SCK). The first byte corresponds to the Global Status byte, second, third and forth byte to the content of the addressed register. Unused bits will be always read as 0. In order to avoid inconsistency between the Global Status byte and the Status register, the Status register contents are frozen during SPI communication. Figure 12. SPI read and clear operation CSN SDI SDO Global Status byte MSB LSB Data byte MSB LSB Command byte MSB Address LSB 1 0 Data byte Read and clear status operation MSB LSB (8 bits) GADG1010171505PS (24 bits) (24 bits) VNF1048F Read mode DS13084 - Rev 6 page 28/52 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |