 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
VNF1048F 数据表(PDF) 41 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
VNF1048F 数据表(HTML) 41 Page - STMicroelectronics |
|
|
41 / 52 page  • VSPI and VS low consumption • SPI inactive • Registers are frozen (powered but with clock stopped) allowing to keep either previous configuration, in case of transition from Unlocked state, or default reset configuration, in case of transition from power-on state. The Standby mode is reached in case of power-on state transition from Unlocked mode through the following SPI frame sequence: 1. Frame #1 to set UNLOCK bit in CR#3 2. Frame #2 to reset EN and set GOSTBY in CR#1 Exit from Standby mode occurs in any of the following cases: CSN Low for a time t > tSTBY_OUT or BYPASS switch in ON state and de-saturation event occurrence. 7.4 WakeUp mode The device enters in WakeUp mode from Stand-by when the VS – VOUT > VDS_BYPASS_SAT In WakeUp mode, the device fuse functionality is armed and the device operates under the following conditions: • High current path through external FETs is ON • Protections for the external FETs are enabled • Low-Current Bypass is OFF • All diagnostics are enabled • Control registers are locked to write operations • Device is self-protected • SPI is active • Charge Pump is ON 7.5 Unlocked mode In Unlocked mode, the device fuse functionality is armed and SPI communication is allowed. The device operates under the following conditions: • High current path through external FETs can be ON or OFF, depending on the SPI setting • Protections for the external FETs are enabled • All diagnostics are enabled • Low-Current Bypass can be ON or OFF, depending on the SPI setting • Device is self-protected • SPI is active • Charge Pump is ON 7.6 Locked mode In locked mode, the device fuse functionality is armed. The device operates under the following conditions: • External FETs status is defined by 'OUTCTL' and 'DIS_OUT_MODE' control bits • Protections for the external FETs are enabled • All diagnostics are enabled • Low-Current Bypass is defined by 'BYPASSCTL' and 'DIS_OUT_MODE' control bits • Device is self-protected • SPI is active, all registers can be read, Control registers are locked to write operations • Charge Pump is ON 7.7 Self-test mode See Section 4 Self Test in this document. VNF1048F WakeUp mode DS13084 - Rev 6 page 41/52 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
