| 数据搜索系统,热门电子元器件搜索 |
|
SL2ICS50 数据表(PDF) 21 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SL2ICS50 数据表(HTML) 21 Page - NXP Semiconductors |
|
21 / 28 page ![]() 136430 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 3.0 — 14 March 2007 21 of 28 NXP Semiconductors SL2 ICS50/SL2 ICS51 I•CODE SLI-L/I•CODE SLI-L HC PUBLIC 8.1.3.14 Write EAS ID Command Code = A7h With the command Write EAS ID a new EAS Identifier is stored in the corresponding configuration memory. If EAS is password protected (for Set and Reset EAS) the EAS password has to be transmitted before with the Set Password command. Table 47. Request format SOF Flags Write EAS IC Mfg code UID EAS ID value CRC16 EOF 8 bits 8 bits 8 bits 64 bits optional 16 bits 16 bits 8 bits Table 48. Response format when Error_flag is set SOF Flags Error code CRC16 EOF 8 bits 8 bits 16 bits Table 49. Response format when Error_flag is NOT set SOF Flags CRC16 EOF 8 bits 16 bits 8.2 Long range command 8.2.1 Long Range CMD Command Code = 40h The Long Range CMD command is designed to allow the use of the higher limits defined in the ISO/TR 7003:1990. The bit and byte coding is the same as it is defined in EPC Specification “13.56 MHz ISM Band Class 1 Radio Frequency (RF) Identification Tag Interface Specification”. To reduce the number of pulses the redundancy check is changed from an CRC8 calculation to a XOR of the transmitted parameters (Long Range CMD, Data Selector, Number of Slots) • Number of Slots: – If the Data Selector is transmitted for EAS the label will ignore the received Number of Slots parameter and will use always one Slot (like EAS Alarm command, see Section 8.1.3.12 “EAS Alarm”). with EAS. For EAS typically 00h is used as the value for Number of Slots to reduce the number of transmitted pulses. – If the Data Selector is transmitted for UID or EPC the label will respond within one of the transmitted Number of Slots on a pseudo random basis and will calculate a new slot for a following command. Labels, which have executed a Destroy EPC command before will not respond to this command, if the Data Selector for EPC is transmitted. Table 50. Request format SSOF Long Range CMD Data Selector Number of Slots XOR CEOF 8 bits 8 bits 8 bits 8 bits 8 bits |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |