| 数据搜索系统,热门电子元器件搜索 |
|
OXCF950 数据表(PDF) 14 Page - Oxford Semiconductor |
|
|
|||||||||||||||||||||||||||||
OXCF950 数据表(HTML) 14 Page - Oxford Semiconductor |
|
14 / 66 page ![]() Page 14 OXCF950 rev B DATA SHEET V 1.0 OXFORD SEMICONDUCTOR LTD. Figure 5: Normal Mode memory space map 5.2.2 Normal Mode Space Map 5.3 Access to IO Function 5.3.1 Access to Internal UART Access to the internal UART is achieved via standard IO mapping. As the device is configured as a single function device, no base address is required to access the UART. As IO mapping is used, access to the UART is permitted only after the card has been configured. Once the Configuration Options Register has been set in the Attribute area, the UART can be accessed following the mapping shown in Table 4. UART Address (hex) CF/PCMCIA offset from address 0 for UART function in IO space (hex) 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 Table 4: UART's mapping in I/O space 5.3.2 Access to Local Bus Access to the internal Local Bus is achieved via standard IO mapping. The Local Bus function is available in Local Bus mode only as it’s device pins are used as the extended address bits required for direct access in Normal mode. Indirect access is only supported in the PCMCIA specification, so the local bus is only available in PCMCIA systems. As the device is configured as a single function device, no base address is required to access the Local Bus. As IO mapping is used, access to the Local Bus is permitted only after the card has been configured. Once the Configuration Options Register has been set in the Attribute area, the Local Bus can be accessed following the mapping shown in Table 5. This access is permitted only if bit[0] is reset to ‘0’ in the MDR register in the UART, otherwise the local configuration registers will be accessed rather than the local bus. Direct Indirect Main CIS either: a) Normal Default b) Bluetooth Default c) Custom CIS (downloaded from EEPROM) 0xFF Common (Valid at even locations only) 0x00 0x00 0x00 0xFF 0xFF 0x00 0xFF Attribute Additional Storage Space, which can be downloaded from the EEPROM. 0x7F 0x80 Function Configuration Registers 0xF8 0xF6 NOT VALID NOT VALID NOT VALID |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |