S3160 – 2.5 Gbps Wide Bandwidth Transimpedance Amplifier

AMCC Confidential and Proprietary

5

Revision A – August 12, 2004

Data Sheet

Electrostatic Discharge (ESD) Sensitivity Rating - Human Body Model (HBM):

The S3160 is rated to the following ESD voltages based upon JEDEC standard: JESD22-A114-B

to 100 volts.

Adherence to standards for ESD protection should be taken during the handling of the devices to ensure that the devices are not dam-

aged. The standards to be used are defined in ANSI standard ANSI/ESD S20.20-1999, "Protection of Electrical and Electronic Parts,

Assemblies and Equipment." Contact your local FAE or sales representative for applicable ESD application notes.

Table 2. Recommended Operating Conditions

Parameter

Min

Typ

Max

Units

-40

+85

°C

-20

+105

°C

3.135

3.3

3.465

V

Table 3. Absolute Maximum Ratings

The following are the absolute maximum stress ratings for the S3160. Stresses beyond those listed may cause permanent damage to the

device. Absolute maximum ratings are stress ratings only and operation of the device at the maximums stated or any other conditions beyond

those indicated in the "Recommended Operating Conditions" of this document are not inferred. Exposure to absolute maximum rating condi-

tions for extended periods may affect device reliability.

Parameter

Min

Typ

Max

Units

-0.5

4

V

Voltage on all Other Pads

-0.5

V

Storage Temperature Range

-55

150

°C