November 2, 2005

Am29PDL129H

47

Table 7. Am29PDL129H Boot Sector/Sector Block

Addresses for Protection/Unprotection

Broke table up into CE1# and CE2# versions and made

modifications to table values to reflect change.

WP# Hardware Protection

Indicated that a write protect pin that can prevent pro-

gram or erase operations in sectors SA1-133, SA1-

134, SA2-0 and SA2-1.

Table 15. Sector Protection Command Definitions

Corrected typos in the PPB status row.

Added Note 17 to PPB Program and PPB Lock Bit Set

commands.

Added Note 18 to DYB Status.

Test Conditions

Added note to Figure 10.

Table 16. Test Specifications

Added specific speed options to table.

CMOS Compatible Table

Figure 11. Input Waveforms and Measurement

Levels

Revision B+1 (August 8, 2003)

Ordering Information

Corrected typo in package marking.

Revision B+2 (December 5, 2003)

Global

Distinctive Characteristics

Performance Characteristics: Under Power Consump-

tion bullet, changed active read current from 55 to 45

mA; changed program/erase current from 25 to 15

mA.

Connection Diagrams

Corrected signal descriptions for balls G1 and J1 on

80-ball fine-pitch BGA package (VBB080).

DC Characteristics

mA.

Table 16, Test Specifications

pF load capacitance.

AC Characteristics

Read-only Operations table: Added note for 70 pF

load capacitance.

Region

Customer-Lockable Area: Added sector protection fig-

ure and changed figure reference in this section from

Figure 1 to Figure 3.

Table 16. Sector Protection Command Definitions

Corrected number of cycles for SecSi Protection Bit

Status, PPMLB Status, and SPMLB Status from 4 to 5

cycles. For these command sequences, inserted a

cycle before the final read cycle (RD0).

Revision B+3 (November 2, 2005)

Updated migration statement on cover page and first

page of data sheet.

This product has been retired and is not available for

designs. For new and current designs, Am29PDL129J

supersedes Am29PDL129H and is the factory-recom-

mende d mig r ation pa th. P l ease refe r to th e

Am29PDL129J datasheet for specifications and order-

ing infor mation. Availability of this document is

retained for reference and historical purposes only.

Updated trademarks.

Trademarks

Copyright © 2000

−2005 Advanced Micro Devices, Inc. All rights reserved.

AMD, the AMD logo, and combinations thereof are registered trademarks of Advanced Micro Devices, Inc.

ExpressFlash is a trademark of Advanced Micro Devices, Inc.

Product names used in this publication are for identification purposes only and may be trademarks of their respective companies.