Document Feedback

TMF882X

Using the EVM Software

Demo Kit Manual

• PUBLIC

UG000495

• v6-00 • 2022-May-19

36

│ 28

Set SPAD Map

Set the SPAD map for the current operation mode.

Figure 27:

Command Overview

Command Code

Parameter

Example

S

0

– 1st SPAD map

1

– 2nd SPAD map

…

The number of SPAD maps varies for each

operation mode.

Setting an out-of-range SPAD map index does

not change anything in the GUI.

(S1)

Control Histogram Display / Logging

Controls the check boxes for histogram display and histogram data logging.

Figure 28:

Command Overview

Command Code

Parameter

Example

H

0

– Switch off all histograms

1

– Switch on reference histograms

2

– Switch on measurement histograms

3

– Switch on reference and measurement

histograms

The EVM GUI ignores all other parameter

values

(H2)

3.6.3

Automation Example Session

To operate the following example, the EVM GUI needs to be started first. Start the Windows shell

"cmd" and connect through the Windows program

“telnet”:

●

telnet 127.0.0.1 39998

This causes an immediate response and in the GUI the status ‘Automation On’ is displayed (removed

headers in the output data):

sep=;

#VER;ToF Serial Number;App0 Version Number;GUI Version Number;Host Driver Version