RQT8017-R datasheet(21/71 Pages) PANASONIC

21 / 71 page

Item

FL display

Key operation

Mode name

Description

(Remote controller key)

P50(H) Output

Timer Microprocessor IC7501-83 output High

signal for AV1-pin 10 passing through inverter

(approx. 0V DC at AV1-pin 10).

When OK.

When NG.

Press [8] [4] in service mode.

P50(L) Output

Timer Microprocessor IC7501-83 output Low

signal for AV1-pin 10 passing through inverter

(approx. 4.4V DC at AV1-pin 10).

When OK.

When NG.

Press [8] [5] in service mode.

Tray OPEN/CLOSE Test The RAM drive tray is opened and closed

repeatedly.

“*” is number of open/close cycle

times.

Press [9] [1] in service mode

*When releasing this mode, press

the [POWER] button of Remote

Controller more than 10 seconds.

Error code initialization

Initialization of the last error code held by

timer (Write in F00)

Press [9] [8] in service mode.

Initialize Service

Last Drive Error, Error history and Error

Codes stored on the unit are initialized to

factory setting.

Press [9] [9] in service mode.

Finishing service mode

Release Service Mode.

Display in STOP (E-E) mode.

Press power button on the front

panel

or Remote

controller

service mode.

DMR-ES10EB / DMR-ES10EC / DMR-ES10EG / DMR-ES10EP / DMR-ES10EBL

RQT8017-R 数据表(PDF) 21 Page - Panasonic Semiconductor

RQT8017-R 数据表(HTML) 21 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载