RQT8017-R datasheet(16/71 Pages) PANASONIC

16 / 71 page

Error Code

Diagnosis contents

Description

Monitor Display

Automatic FL display

PLEASE

WAIT

Unit is in termination process

Unit is in termination process now.

“BYE” is displayed and power will be turned

off.

In case “Quick Start” of setup menu is ON, it

is displayed in restoration operation for AC

off.

No display

9.2.

Special Modes Setting

Item

FL display

Key operation

Mode name

Description

Front Key

TEST Mode

*All the main unit´s parameters (include tuner)

are initialized.

Press

[STOP],

[CH

UP]

and

[OPEN/CLOSE]

keys

simultaneously

for five seconds

when power is off.

Rating password

The audiovisual level setting password is

initialized to “Level 8”.

Open the tray, and press [REC] and

[PLAY]

simultaneously

for

seconds.

NOTE:

Drive should be selected to DVD.

Service Mode

Setting every kind of modes for servicing.

*Details are described in “9.3. Service

Mode”.

When the power is off, press [CH

UP], [OPEN/CLOSE] and [REC]

keys simultaneously for 5 seconds.

Forced disc eject

Removing a disc that cannot be ejected.

The tray will open and unit will shift to P-off

mode.

*When Timer REC is ON or EXT-LINK is ON,

execute " Forced disc eject " after releasing

Timer REC or EXT-LINK.

*This command is not effective during "Child

lock" is ON.

While Demonstration Lock is being set, this

Forced disc eject function is not accepted.

The

display

before

execution

leaves.

When the power is off, press

[STOP]

and

[CH

UP]

keys

simultaneously for 5 seconds.

Child lock/unlock

Set or release “Child Lock”.

Press [ENTER] and [RETURN] by

remote

controller

simultaneously

until [X-HOLD] is displayed.

NTSC/PAL system select To switch PAL/NTSC alternately.

The

display

before

execution

leaves.

While the power is on (E-E mode),

press [STOP] and [OPEN/CLOSE]

simultaneously for 5 seconds.

Forced power-off

When the power button is not effective while

power is ON, turn off the power forcibly.

*When Timer REC is ON or EXT-LINK is ON,

execute “Forced Power-off” after releasing

Timer REC or EXT-LINK.

Display in P-off mode.

Press [Power] key over than 10

seconds.

Aging

Perform sequence of modes as * Aging

Description shown below continually.

Display following the then mode.

When the power is ON, press

[STOP],

[POWER]

and

[OPEN/CLOSE] simultaneously for

over 5 seconds and less than 10

seconds.

NOTE1:

If Unit has not turned into Aging

mode by operations shown above,

execute TEST MODE once and re-

execute operation shown above.

(*All the main unit’s parameters

include tuner are initialized by TEST

mode.)

NOTE2:

If the unit has hung-up because of

pressing keys for over 10 seconds,

once turn off the power, and re-

execute this command.

*When releasing Aging mode, press

[POWER] key.

DMR-ES10EB / DMR-ES10EC / DMR-ES10EG / DMR-ES10EP / DMR-ES10EBL

RQT8017-R 数据表(PDF) 16 Page - Panasonic Semiconductor

RQT8017-R 数据表(HTML) 16 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载

链接网址

RQT8017-R 数据表(PDF) 16 Page - Panasonic Semiconductor

RQT8017-R 数据表(HTML) 16 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表 下载

链接网址

数据表下载