ADE7752B datasheet(18/27 Pages) AD

18 / 27 page

ADE7752B

Preliminary Technical Data

Rev. PrA | Page 18 of 27

POWER SUPPLY MONITOR

The ADE7752B contains an on-chip power supply monitor. The

power supply (VDD) is monitored continuously by the ADE7752B.

At power up, when the supply is less than 4V ±2% and VREF is less

than 1.9 V (typ), the outputs of the ADE7752B are inactive and

the data path is held in reset. Once VDD is greater than 4V ±2%

and VREF is greater than 1.9 V (typ), the chip is active and energy

accumulation begins. At power-down, when VDD falls below 4 V

or VREF falls below 1.9 V (typ), the data path is again held in reset.

This implementation ensures correct device operation at power-

up and at power-down. The power supply monitor has built-in

hysteresis and filtering. This gives a high degree of immunity to

false triggering due to noisy supplies.

The power supply and decoupling for the part should be such

that the ripple at VDD does not exceed ±5% as specified for

normal operation.

VDD

VREF

INTERNAL

RESET

ACTIVE

INACTIVE

2.4V

1.9V

INACTIVE

Figure 23. On-Chip Power Supply Monitor

ADE7752B 数据表(PDF) 18 Page - Analog Devices