ADL5519ACPZ-R7 datasheet(12/27 Pages) AD

12 / 27 page

ADL5519

Preliminary Technical Data

Rev. PrB | Page 12 of 27

TYPICAL PERFORMANCE CHARACTERISTICS

VP = 5 V; TA = +25°C, –40°C, +85°C; CLPA/B = OPEN. Colors: +25°C black, –40°C blue, +85°C red.

Figure 3: OUT[A, B] Voltage and Log Conformance vs. Input Amplitude

at 450 MHz, Typical Device, ADJ[A, B] = 0 V, Sine Wave, Differential

Drive,

Figure 4: Distribution of OUT[A, B] Voltage and Error over Temperature

After Ambient Normalization vs. Input Amplitude for at Least 30

Devices from Multiple Lots, Frequency = 450 MHz, ADJ[A, B] = 0 V, Sine

Wave, Differential Drive

Figure 5: Distribution of [OUTA – OUTB] Gain vs. Input Amplitude over

Temperature for at Least 30 Devices from Multiple Lots, Frequency =

450 MHz, ADJ[A, B] = 0 V, Sine Wave, Differential Drive

Figure 6: OUT[P, N]Gain and Log Conformance vs. Input Amplitude at

450 MHz, Typical Device, ADJ[A, B] = 0 V, Sine Wave, Differential Drive

(Note that the OUTP and OUTN Error Curves Overlap)

Figure 7: Distribution of [OUTP − OUTN] Gain and Error over

Temperature After Ambient Normalization vs. Input Amplitude for at

Least 30 Devices from Multiple Lots, Frequency = 450 MHz, ADJ[A, B] =

0 V, Sine Wave, Differential Drive, PIN Ch. B = −25 dBm, Channel A

Swept

Figure 8: OUT[A, B] Voltage and Log Conformance vs. Input Amplitude

at 880 MHz, Typical Device, ADJ[A, B] = 0.5 V, Sine Wave, Differential

Drive,

ADL5519ACPZ-R7 数据表(PDF) 12 Page - Analog Devices