| 数据搜索系统,热门电子元器件搜索 |
|
ADP1864AUJZ-R7 数据表(PDF) 3 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP1864AUJZ-R7 数据表(HTML) 3 Page - Analog Devices |
|
3 / 16 page ![]() ADP1864 Rev. 0 | Page 3 of 16 SPECIFICATIONS VIN = 5 V, TA = 25°C, unless otherwise noted. Table 1. Parameter Symbol Conditions Min Typ Max Unit POWER SUPPLY Input Voltage VIN 3.15 14 V Quiescent Current IQ VIN = 3.15 V to 14 V, GATE = IN 235 350 μA Shutdown Supply Current ISD VIN = 3.15 V to 14 V, COMP = GND 7 15 μA Undervoltage Lockout Threshold VUVLO VIN falling, TA = −40°C to +85°C 2.75 2.90 3.01 V VIN rising, TA = −40°C to +85°C 2.85 3.00 3.10 V ERROR AMPLIFIER FB Input Current IFB VFB = 0.8 V −20 -2 20 nA FB Input Current IFB VFB = 0.8 V, TA = −40°C to +85°C −35 -2 35 nA Amplifier Transconductance VFB = 0.8 V, ICOMP = ±5 μA 0.24 mS COMP Startup Threshold VIN = 3.15 V to 14 V , TA = −40°C to +85° 0.55 0.67 0.80 V COMP Shutdown Threshold VIN = 3.15 V to 14 V , TA = −40°C to +85° 0.15 0.3 0.55 V COMP Startup Current Source COMP = GND 0.25 0.6 0.85 μA FB Regulation Voltage VIN = 3.15 V to 14 V , TA = −40°C to +85° 0.790 0.8 0.810 V Overvoltage Protection Threshold VOVP Measured at FB 0.87 0.885 0.9 V Overvoltage Protection Hysteresis 50 mV CURRENT SENSE Peak Current Sense Voltage TA = −40°C to +85°C 90 125 mV Peak Current Sense Voltage VIN = 3.15 V to 14 V, TA = −40°C to +85°C 80 125 mV Current Sense Gain VCS to VCOMP 12 V/V OUTPUT REGULATION Line Regulation1 VIN = 3.15 V to 14 V, VFB/VIN 0.12 mV/V Load Regulation2 VFB/VCOMP −2 mV/V OSCILLATOR Oscillator Frequency VFB = 0.8 V 500 580 650 kHz VFB = 0 V 190 kHz FB Frequency Foldback Threshold 0.35 V GATE DRIVE Gate Rise Time CGATE = 3 nF 50 ns Gate Fall Time CGATE = 3 nF 40 ns Minimum On Time PGATE minimum low duration 190 ns SOFT START POWER-ON TIME 1.1 ms 1 Line regulation is measured with the application circuit of Figure 1. Line regulation is specified as being the change in the FB voltage resulting from a 1 V change in the IN voltage. 2 Load regulation is measured using the application circuit from Figure 1. Load regulation is specified as the change in the FB voltage resulting from a 1 V change in COMP voltage. The COMP voltage range is typically 0.9 V to 2.3 V for the minimum to maximum load current condition. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |