Caution Electro-static sensitive devices

The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all devices/types available in every country. Please check with local NEC representative for

availability and additional information.

BIPOLAR ANALOG INTEGRATED CIRCUIT

µµµµPC1663

DC to VHF WIDEBAND DIFFERENTIAL INPUT AND OUTPUT AMPLIFIER IC

DATA SHEET

Document No. G11024EJ6V0DS00 (6th edition)

Date Published September 1999 N CP(K)

Printed in Japan

The mark

shows major revised points.

1987, 1999

©

DESCRIPTION

The

µPC1663 is a differential input, differential output wideband amplifier IC that uses an high frequency silicon

bipolar process. This process improves bandwidth phase characteristics, input noise voltage characteristics, and low

power consumption when compared to conventional HF-band differential amplifier ICs.

These features make this device suitable as a wideband amplifier in high-definition TVs, high-resolution monitors,

broadcasting satellite receivers, and video cameras, as a sense amplifier in high-density CCD and optical pick-up

products, or as a pulse amplifier for optical data links.

These ICs are manufactured using NEC’s 6 GHz fT NESAT

TM I silicon bipolar process. This process uses silicon

nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and

prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability.

FEATURES

• Bandwidth and typical gain : 120 MHz @ AVOL = 300

700 MHz @ AVOL = 10

• Phase delay

: –85 deg. @ AVOL = 100, 100 MHz

• Input Noise Voltage

: 3

µVr.m.s. (RS = 50 Ω, 10 k to 10 MHz)

• Supply Current

: 13mA TYP. @ VCC± =

±6 V

• Gain adjustable from 10 to 300 with external resistor

• No frequency compensation required (Small phase delay at 10 MHz or less)

ORDERING INFORMATION

Part Number

Package

Marking

Supplying Form

µPC1663G-E1

8-pin plastic SOP (225 mil)

Embossed tape 12 mm wide.

Pin 1 is in tape pull-out direction.

Qty 2.5 kp/reel.

µPC1663GV-E1

8-pin plastic SSOP (175 mil)

1663

Embossed tape 8 mm wide.

Pin 1 is in tape pull-out direction.

Qty 1 kp/reel.

Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order:

µPC1663G, µPC1663GV)

Caution

µµµµPC1663C (8-pin plastic DIP) is discontinued.