| 数据搜索系统,热门电子元器件搜索 |
|
TC1270AMAVRCTR 数据表(PDF) 21 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
TC1270AMAVRCTR 数据表(HTML) 21 Page - Microchip Technology |
|
21 / 42 page ![]() 2007-2022 Microchip Technology Inc. and its subsidiaries DS20002035F-page 21 TC1270A/70AN/71A 4.5 Reset Generator Circuit The output signals from the voltage detect circuit and the manual Reset with glitch filter circuit are OR’d together and used to activate the Reset generator module. After the Reset conditions have been removed (the MR pin is no longer forced low and the input voltage is greater than the trip point voltage), the Reset generator circuit determines the Reset delay time-out required. There are three options for the delay circuit. These are: • 2.19 ms (typical) delay • 35 ms (typical) delay • 280 ms (typical) delay 4.5.1 RESET DELAY TIMER The Reset Delay Timer ensures that the TC127XA device will “hold” the embedded system in Reset until the system voltage has stabilized. The Reset Delay Timer time-out is shown in Table 4-4. The Reset Delay Timer starts when the voltage detect circuit output AND the manual Reset with glitch filter circuit output become inactive. While the Reset Delay Timer is active, the RST or RST pin is driven to the active state. When the Reset Delay Timer times out, the RST or RST pin is driven inactive. The Reset Delay Timer (tRST) starts after the device voltage rises above the “actual” trip point (VTRIP). When the Reset Delay Timer times out, the Reset out- put pin (RST/RST) is driven inactive. The Reset Delay Timer is cleared if either, or both, the voltage detector circuit output and the manual Reset with glitch filter circuit output become active. The RST or RST pin continues to be driven to the active state. Figure 4-12 illustrates when the Reset Delay Timer (tRST) is active or inactive. 4.5.2 EFFECT OF TEMPERATURE ON RESET POWER-UP TIMER (tRPU) The Reset Delay Timer time-out period (tRST) determines how long the device remains in the Reset condition. This time out is affected by the device VDD and the temperature. Typical responses for varying VDD values and temperatures are presented in Figures 2-28, 2-29 and 2-30. TABLE 4-4: RESET DELAY TIMER TIME OUTS FIGURE 4-12: Reset Power-Up Timer Waveform. tRST Units Min. Typ. Max. 1.09 2.19 4.38 ms 17.5 35 70 ms 140 280 560 ms This is the minimum time that the Reset Delay Timer will “hold” the Reset pin active after VDD rises above VTRIP This is the maximum time that the Reset Delay Timer will “hold” the Reset pin active after VDD rises above VTRIP Note 1: Shaded rows are custom-ordered time outs. VTRIP VDD RST tRST Reset Delay Timer Inactive Reset Delay Timer Inactive See Figures 2-9, 2-7 and 2-8 See Figures 2-12, 2-11 and 2-10 See Figures 2-9, 2-7 and 2-8 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |