WM9713LGEFLSLASHV datasheet(27/108 Pages) WOLFSON

27 / 108 page

Pre-Production

WM9713L

PP Rev 3.0 June 2006

RECORD SELECTOR

The record selector determines which input signals are routed into the audio ADC. The left and right

channels can be selected independently. This is useful for recording a phone call: one channel can

be used for the RX signal and the other for the TX signal, so that both sides of the conversation are

digitized.

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

RECBST

20dB Boost

1: Boost ADC input signal by 20dB

0 :No boost

Note: RECBST gain is in addition to the

microphone pre-amps (MPABST and

MPBBST bits) and record gain (GRL and

GRR / GRL bits).

5:3

RECSL

000

Left ADC signal source

000: MICA (pre-PGA)

001: MICB (pre-PGA)

010: LINEL (pre-PGA)

011: MONOIN (pre-PGA)

100: Headphone Mix (left)

101: Speaker Mix

110: Mono Mix

111: Reserved (do not use this setting)

14h

Record

Routing /

Mux Select

2:0

RECSR

000

Right ADC signal source

000: MICA (pre-PGA)

001: MICB (pre-PGA)

010: LINER (pre-PGA)

011: MONOIN (pre-PGA)

100: Headphone Mix (right)

101: Speaker Mix

110: Mono Mix

111: Reserved (do not use this setting)

Table 11 Audio Record Selector

WM9713LGEFL/V 数据表(PDF) 27 Page - Wolfson Microelectronics plc

WM9713LGEFL/V 数据表(HTML) 27 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载