Datasheet EE310

v2.7 / Modification rights reserved | 2

EE310

The EE310 is optimized for best reliability in industrial applications from -80 °C (-112 °F) up to 180 °C (356 °F) and 20 bar

(290 psi). In addition to highly accurate measurement of the relative humidity (RH) and temperature (T), the device

calculates all other humidity related parameters.

Measurement Performance

The EE310 employs high-end E+E humidity sensing elements manufactured in state-of-the-art thin film technology, which

enable the outstanding measurement accuracy.

Long-Term Stability

The E+E proprietary coating protects the sensing elements against corrosive and electrically conductive pollution, which

leads to outstanding long-term stability even in harsh environment. With the selection of the appropriate filter cap, the

EE310 tackles even challenging industrial applications.

Versatility

The EE310 is available for wall or duct mount as well as with remote probe. It features an IP65 / NEMA 4X polycarbonate

or stainless steel enclosure which facilitates installation and maintenance. The enclosure can accommodate a 100 -240 VAC

supply unit or various interface modules.

Display and Outputs

The measured data is available on two analogue outputs and on the RS485 (Modbus RTU) or Ethernet-PoE (Modbus TCP)

interface. The TFT colour display shows up to four measurands simultaneously and offers extensive setup and diagnosis

features. The data logging function saves up to 20 000 measured values for each physical quantity. The logged data can

be displayed graphically directly on the device or easily downloaded over the USB interface.

Configurable and Adjustable

The configuration and the RH and T adjustment of the EE310 can be performed either using the display and the push

buttons or with the free E+E PCS10 Product Configuration Software via the USB interface.

Stainless steel enclosure for wall mounting

Polycarbonate enclosure for duct mounting

High-End Humidity and Temperature Sensor for Industrial Applications