PoE 8 Port Switch

Features

• High Power 10/100Mb 8 Port PoE Switch

• Remotely Power Equipment thru CAT5 Cable up to 100m

• Extend Ethernet and PoE up to 200m

• Up to 2A per Port

• Built-In Surge Protection

• Automatic MDI/MDI-X Crossover

• High Temperature Operation

• CE and FCC Certification

Applications

• Wireless Access Points and Client Devices

• IP Phone and Security Camera Systems

• Power multiple devices from 1 data cable

• PoE Lighting Applications

Description

The TP-SW8-D Power over Ethernet 802.3af/at (PoE) 10/100Mb switch offered by Tycon Power® is a fully automatic

high speed 8 port Ethernet switch. The -NC version is a passive PoE model for devices which are not 802.3af/at

compliant. On the -NC version the PoE output voltage = the input voltage so it is universal in its application. The DC

input power range can be from 12V to 57V. The units can be powered via 2 or 4 pair PoE to port 8 (2A max). TP-SW8-

D has a 2 channel 802.3at input for 70W max PoE input. Both models supply power to the remote device on the

unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the

PoE switch and the remote device.

18V, 24V and 48V 60W, 120W and 180W power supplies are available. There are 2 power inputs for attachment of

primary and backup power sources.

Device Pinouts

RJ-45 Port 8 (Data/PoE Input)

RJ-45 Port 1-7 (Data & PoE Out)

Pin

Symbol

Description

Symbol

Description

1

RX+, V+, V-

Data Rx(+), PoE in

RX+

Data Receive(+)

2

RX-, V+, V-

Data Rx(-), PoE in

RX-

Data Receive(-)

3

TX+, V-, V+

Data Tx(+), PoE in

TX+

Data Transmit(+)

4

V+, V-

PoE in,

+Vdc

DC power(+)

5

V+, V-

PoE in

+Vdc

DC power(+)

6

TX-, V-, V+

Data Tx(-), PoE in

TX-

Data Transmit(-)

7

V-, V+

PoE in

-Vdc

DC power(-)

8

V-, V+

PoE in

-Vdc

DC power(-)

DATA SHEET

TP-SW8 Series