TCS3410 datasheet(36/85 Pages) OSRAM

部件名	TCS3410

功能描述	Universal Ambient Light RGB Sensor with Selective Flicker Detection for Use Behind OLED Displays or Auxiliary to Camera

PDF	85 Pages

Scroll/Zoom	100%

制造商	OSRAM [OSRAM GmbH]

网页	http://www.osram.com

标志

36 / 85 page

Datasheet, Public

Page 35

[v3-00] 2022-Dec-10

Document Feedback

TCS3410 − Register Overview

Note(s):

1. Return to the Register Map (0xA2).

CFG2 Register

Figure 43:

CFG2

Note(s):

1. Return to the Register Map (0xA3).

DO_ALS_FINAL_

PROCESSING

0R/W

If this bit is set to “1” and flicker measurement takes

longer than ALS measurement, ALS measurement

writings are postponed until flicker measurement is

finished. Otherwise ALS data is not written to FIFO.

1:0

Reserved

Addr: 0xA3

CFG2

Bit

Field

Reset

Type

Bit Description

7AINT_DIRECT

R/W

ALS Interrupt Direct. Enables the direct mode of

ALS interrupt. ALS interrupts are only generated

when ALS_DATA (selected by ALS_THRESHOLD_

CHANNEL) moves over the hysteresis edges (AINT_

AILT and AINT_AIHT). If bit is “0”, interrupts are

always generated if ALS_DATA is above AIHT or

below AILT. The status of the ALS interrupt is directly

output on the INT or GPIO pin if this mode is enabled

and either of those pins are configured to do so

according to the INT_PINMAP and VSYNC_GPIO_

PINMAP settings.

6:1

Reserved

0FIFO_THR[0]

R/W

FIFO threshold LSB. Please see FIFO_THR for

information.

Addr: 0xA2

CFG1

Bit

Field

Reset

Type

Bit Description

TCS3410 数据表(PDF) 36 Page - OSRAM GmbH

TCS3410 数据表(HTML) 36 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

数据表下载