TMG49037 datasheet(48/79 Pages) OSRAM

48 / 79 page

ams Datasheet

Page 47

[v1-01] 2019-Aug-20

Document Feedback

TMG49037 − Register Description

Status Register Three (STATUS3 0xB3)

Figure 51:

Status Register Three

Gesture Sample Time Register (GTIME 0xB4)

Figure 52:

Gesture Sample Time Register

Reserved

SAI_ACTIVE

Reserved

Field

Bits

Description

Reserved

7:2

Reserved.

SAI_ACTIVE

Sleep-After-Interrupt Active. If SAI is set, indicates that the

oscillator has been stopped and the device is in sleep after an

interrupt. SAI_ACTIVE must be cleared (CONTROL 0xBC[0]: CLEAR_

SAI_ACTIVE) to clear SAI and resume chip operation.

Reserved

Reserved.

76543

GTIME

Field

Bits

Description

GTIME

7:0

Gesture Sample Time. Sets the gesture sample rate while in gesture

mode, GMODE. The power on reset value is 0x0A. Gesture data is

collected once for each sample time. There is a minimum GTIME that

must be configured that depends on the GPULSE and PGPULSE_LEN

settings. The maximum GPULSE and PGPULSE_LEN settings for the

default GTIME (0x0A) are GPULSE = 15 (16 pulses) and PGPULSE_LEN = 1

(8μs). Contact technical support for more information.

VALUE

SAMPLE TIME

0x00

88μs

0x01

176μs

0x0A

968μs

0x70

9.9ms

…

μs X (GTIME +1)

0xFF

22.5ms

TMG49037 数据表(PDF) 48 Page - OSRAM GmbH

TMG49037 数据表(HTML) 48 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

数据表下载

链接网址

TMG49037 数据表(PDF) 48 Page - OSRAM GmbH

TMG49037 数据表(HTML) 48 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

数据表 下载

链接网址

数据表下载