MPX2200

Sensors

Freescale Semiconductor

3

Characteristic

Symbol

Min

Typ

Max

Units

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

0

—

200

kPa

2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional

error due to device self-heating.

—

10

16

Supply Current

—

6.0

—

mAdc

minimum related pressure.

38.5

40

41.5

mV

-1.0

—

1.0

mV

Sensitivity

∆V/∆Ρ

—

0.2

—

mV/kPa

MPX2200D Series

MPX2200A Series

5. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure, using end point method, over the specified

pressure range.

• Temperature Hysteresis:Output deviation at any temperature within the operating temperature range, after the temperature is cycled to

and from the minimum or maximum operating temperature points, with zero differential pressure applied.

• Pressure Hysteresis:

Output deviation at any pressure with the specified range, when this pressure is cycled to and from the minimum

or maximum rated pressure at 25°C.

• TcSpan:

Output deviation at full rated pressure over the temperature range of 0 to 85°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C.

—

-0.25

-1.0

—

—

0.25

1.0

—

—

±0.1

—

—

—

±0.5

—

-1.0

—

1.0

-1.0

—

1.0

mV

Input Impedance

1300

—

2500

W

Output Impedance

1400

—

3000

W

6. Response Time is defined as the time form the incremental change in the output to go from 10% to 90% of its final value when subjected

to a specified step change in pressure.

—

1.0

—

ms

Warm-Up Time

—

—

20

—

ms

7. Offset stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

—

—

±0.5

—