MPX4115A MPXA4115A SERIES

2

Motorola Sensor Device Data

Parametrics

Units

Maximum Pressure (P1

u P2)

400

kPa

Storage Temperature

–40

° to +125°

°C

Operating Temperature

–40

° to +125°

°C

NOTE: Exposure beyond the specified limits may cause permanent damage or degradation to the device.

required to meet Electrical Specifications.)

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range

15

—

115

kPa

4.85

5.1

5.35

Vdc

Supply Current

—

7.0

10

mAdc

(0 to 85

°C)

0.135

0.204

0.273

Vdc

(0 to 85

°C)

4.725

4.794

4.863

Vdc

(0 to 85

°C)

4.521

4.590

4.659

Vdc

(0 to 85

°C)

—

—

—

±1.5

Sensitivity

V/P

—

45.9

—

mV/kPa

—

1.0

—

ms

Output Source Current at Full Scale Output

—

0.1

—

mAdc

—

—

20

—

ms

—

—

±0.5

—

NOTES:

1. Device is ratiometric within this specified excitation range.

minimum rated pressure.

5. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span

at 25

°C due to all sources of error including the following:

• Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential

pressure applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from

minimum or maximum rated pressure at 25

°C.

• TcSpan:

Output deviation over the temperature range of 0

° to 85°C, relative to 25°C.

• TcOffset:

Output deviation with minimum pressure applied, over the temperature range of 0

° to 85°C, relative

to 25

°C.

6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

7. Warm–up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized.

8. Offset Stability is the product’s output deviation when subjected to 1000 cycles of Pulsed Pressure, Temperature Cycling with Bias Test.

MECHANICAL CHARACTERISTICS

Characteristics

Typ

Unit

Weight, Basic Element (Case 867)

4.0

grams

Weight, Small Outline Package (Case 482)

1.5

grams

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005