ADL8101ACPZN-R7 datasheet(29/35 Pages) AD

29 / 35 page

Data Sheet

ADL8101

APPLICATIONS INFORMATION

analog.com

Rev. 0 | 29 of 35

The basic connections for operating the ADL8101 from 10 MHz to

22 GHz are shown in Figure 121. AC-couple the input and output

of the ADL8101 with appropriately sized capacitors (such as TDK

Corporation Part Number C1005X7S1A105K050BC).

Figure 119. Gain and Return Loss vs. Frequency of 10 MHz to 22 GHz

Application Circuit, 10 kHz to 200 MHz,

VDD = 5 V, IDQ = 90 mA, RBIAS = 715 Ω

The bias conditions, VDD = 5 V and IDQ = 90 mA, are the recom-

mended operating point to achieve specified performance. The gain

and return loss of this circuit are shown in Figure 119 and Figure

120 across frequencies. To set other bias conditions, adjust the

RBIAS value. Table 8 shows the recommended RBIAS values and

their associated IDQ values.

Figure 120. Gain and Return Loss vs. Frequency of 10 MHz to 22 GHz

Application Circuit, 200 MHz to 24 GHz,

VDD = 5 V, IDQ = 90 mA, RBIAS = 715 Ω

Figure 121. Typical Application Circuit for Operation from 10 MHz to 22 GHz

ADL8101ACPZN-R7 数据表(PDF) 29 Page - Analog Devices