24LCS21-SLASHP datasheet(12/24 Pages) MICROCHIP

12 / 24 page

24LCS21

DS21127F-page 12

FIGURE 7-2:

RANDOM READ

7.3

Sequential Read

Sequential reads are initiated in the same way as a

random read except that after the 24LCS21 transmits

the first data byte, the master issues an acknowledge

as opposed to a Stop condition in a random read. This

directs the 24LCS21 to transmit the next sequentially

addressed 8-bit word (Figure 8-1).

To provide sequential reads, the 24LCS21 contains an

internal Address Pointer which is incremented by one

at the completion of each operation. This Address

Pointer allows the entire memory contents to be serially

read during one operation.

7.4

Noise Protection

The 24LCS21 employs a VCC threshold detector circuit

which disables the internal erase/write logic if the VCC

is below 1.5 volts at nominal conditions.

The SDA, SCL and VCLK inputs have Schmitt Trigger

and filter circuits which suppress noise spikes to assure

proper device operation, even on a noisy bus.

Bus Activity

Master

SDA Line

Bus Activity

Control

Byte

Word

Address

Data n

Control

Byte

10 1 0 0 0 00

24LCS21-/P 数据表(PDF) 12 Page - Microchip Technology

24LCS21-/P 数据表(HTML) 12 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

数据表下载