PIC16F505-ESLASHMS datasheet(18/100 Pages) MICROCHIP

18 / 100 page

PIC12F508/509/16F505

DS41236C-page 16

Preliminary

4.2

Program Memory Organization

For The PIC16F505

The PIC16F505 device has a 11-bit Program Counter

(PC) capable of addressing a 2K x 12 program memory

space.

The 1K x 12 (0000h-03FFh) for the PIC16F505 are

physically implemented. Refer to Figure 4-2. Access-

ing a location above this boundary will cause a wrap-

around within the first 1K x 12 space. The effective

Reset vector is at 0000h (see Figure 4-2). Location

03FFh contains the internal oscillator calibration value.

This value should never be overwritten.

FIGURE 4-2:

PROGRAM MEMORY MAP

AND STACK FOR THE

PIC16F505

4.3

Data Memory Organization

Data memory is composed of registers or bytes of

RAM. Therefore, data memory for a device is specified

by its register file. The register file is divided into two

functional groups: Special Function Registers (SFR)

and General Purpose Registers (GPR).

The Special Function Registers include the TMR0 reg-

ister, the Program Counter (PCL), the STATUS register,

the I/O registers (ports) and the File Select Register

(FSR). In addition, Special Function Registers are used

to control the I/O port configuration and prescaler

options.

The General Purpose Registers are used for data and

control information under command of the instructions.

For the PIC12F508/509, the register file is composed of

7 Special Function Registers, 9 General Purpose

Registers and 16 or 32 General Purpose Registers

accessed by banking (see Figure 4-3 and Figure 4-4).

For the PIC16F505, the register file is composed of 8

Special Function Registers, 8 General Purpose

Registers and 64 General Purpose Registers accessed

by banking (Figure 4-5).

4.3.1

GENERAL PURPOSE REGISTER

FILE

The General Purpose Register file is accessed, either

directly or indirectly, through the File Select Register

(FSR). See Section 4.9 “Indirect Data Addressing:

INDF and FSR Registers”.

CALL, RETLW

PC<11:0>

Stack Level 1

Stack Level 2

0000h

7FFh

01FFh

0200h

Reset Vector(1)

Note

Address 0000h becomes the

effective Reset vector. Location

03FFh contains the MOVLW XX

internal oscillator calibration value.

1024 Words

03FFh

0400h

On-chip Program

Memory

PIC16F505-E/MS 数据表(PDF) 18 Page - Microchip Technology

PIC16F505-E/MS 数据表(HTML) 18 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

数据表下载