12F615 datasheet(56/168 Pages) MICROCHIP

56 / 168 page

PIC12F609/615/12HV609/615

DS41302A-page 54

Preliminary

8.2

Analog Input Connection

Considerations

A simplified circuit for an analog input is shown in

Figure 8-3. Since the analog input pins share their con-

nection with a digital input, they have reverse biased

ESD protection diodes to VDD and VSS. The analog

input, therefore, must be between VSS and VDD. If the

input voltage deviates from this range by more than

0.6V in either direction, one of the diodes is forward

biased and a latch-up may occur.

A maximum source impedance of 10 k

Ω is recom-

mended for the analog sources. Also, any external

component connected to an analog input pin, such as

a capacitor or a Zener diode, should have very little

leakage current to minimize inaccuracies introduced.

FIGURE 8-3:

ANALOG INPUT MODEL

Note 1: When reading a GPIO register, all pins

configured as analog inputs will read as a

‘0’. Pins configured as digital inputs will

convert as an analog input, according to

the input specification.

2: Analog levels on any pin defined as a dig-

ital input, may cause the input buffer to

consume more current than is specified.

RS < 10K

CPIN

5 pF

VDD

≈ 0.6V

RIC

ILEAKAGE

±500 nA

VSS

AIN

Legend: CPIN

= Input Capacitance

ILEAKAGE = Leakage Current at the pin due to various junctions

RIC

= Interconnect Resistance

= Source Impedance

= Analog Voltage

= Threshold Voltage

To Comparator

12F615 数据表(PDF) 56 Page - Microchip Technology

12F615 数据表(HTML) 56 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载