8 Device and Documentation Support

8.1 Receiving Notification of Documentation Updates

To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on

Notifications to register and receive a weekly digest of any product information that has changed. For change

details, review the revision history included in any revised document.

8.2 Support Resources

TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight

from the experts. Search existing answers or ask your own question to get the quick design help you need.

Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do

not necessarily reflect TI's views; see TI's Terms of Use.

8.3 Trademarks

TI E2E™ is a trademark of Texas Instruments.

All trademarks are the property of their respective owners.

8.4 Electrostatic Discharge Caution

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled

with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may

be more susceptible to damage because very small parametric changes could cause the device not to meet its published

specifications.

8.5 Glossary

TI Glossary

This glossary lists and explains terms, acronyms, and definitions.

9 Revision History

Changes from Revision D (November 2014) to Revision E (November 2024)

Page

• Updated the numbering format for tables, figures, and cross-references throughout the document................. 1

• Added the P (PDIP, 8), DGK (VSSOP, 8), and DDF (SOT-23, 8) packages to the data sheet...........................1

• Changed the slew rate value listed in the Slew Rate section from: 5V/ms to: 5V/µs to match the slew rate

values listed in the Features section and Electrical Characteristics table.......................................................... 8

• Deleted references to the Circuit Board Layout Techniques application note.................................................. 11

Changes from Revision C (March 2004) to Revision D (November 2014)

Page

• Added Applications, Device Information table, Pin Functions table, Handling Ratings table, Feature

Description section, Device Functional Modes, Application and Implementation section, Power Supply

Recommendations section, Layout section, Device and Documentation Support section, and Mechanical,

Packaging, and Orderable Information section.................................................................................................. 1

• Removed Ordering Information table................................................................................................................. 1

• Changed TA = 25°C to TA = –40°C to 125°C in condition statement for Electrical Characteristics table and

Operational Characteristics table........................................................................................................................5

10 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most

current data available for the designated devices. This data is subject to change without notice and revision of

this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

www.ti.com

RC4580

SLOS412E – APRIL 2003 – REVISED NOVEMBER 2024

Copyright © 2024 Texas Instruments Incorporated

Submit Document Feedback

13

Product Folder Links: RC4580