Limits in standard typeface are for T

C

Ω and R

82k

Ω (Note 9).

Symbol

Parameter

Condition

Min

Typ

Max

Units

I

VDD

Standby supply current

(V

NSTBY = L

Register 0DH=08H (Note 10)

1.7

7

µA

No-boost supply current

(V

NSTBY = H,

EN_BOOST = L

300

800

µA

No-load supply current

(V

NSTBY = H,

EN_BOOST = H

Autoload OFF

750

1300

uA

V

DDA

Output voltage of internal LDO

I

2.80

V

-3

+3

%

V

REF

Reference voltage (Note 11)

1.23

V

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Operating Ratings are conditions under which operation of

the device is guaranteed. Operating Ratings do not imply guaranteed performance limits. For guaranteed performance limits and associated test conditions, see the

Electrical Characteristics tables.

Note 2: All voltages are with respect to the potential at the GND pins.

Note 4: For detailed soldering specifications and information, please refer to National Semiconductor Application Note AN1112 : Micro SMD Wafer Level Chip Scale

Package

Note 5: The Human body model is a 100pF capacitor discharged through a 1.5k

Ω resistor into each pin. The machine model is a 200pF capacitor discharged

directly into each pin. MIL-STD-883 3015.7

Note 6: In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may have to be

Note 7: Junction-to-ambient thermal resistance is highly application and board-layout dependent. In applications where high maximum power dissipation exists,

special care must be paid to thermal dissipation issues in board design.

Note 8: Min and Max limits are guaranteed by design, test, or statistical analysis. Typical numbers are not guaranteed, but do represent the most likely norm.

Note 9: Low-ESR Surface-Mount Ceramic Capacitors (MLCCs) used in setting electrical characteristics.

Note 10: Boost output voltage set to 8V (08H in register 0DH) to prevent any unneccessary current consumption.

www.national.com

5