数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

STA2416 数据表(PDF) 21 Page - STMicroelectronics

部件名 STA2416
功能描述  Bluetooth??Baseband with integrated flash
PDF  38 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 STMICROELECTRONICS - STMicroelectronics

STA2416 数据表(HTML) 21 Page - STMicroelectronics

Back Button STA2416 Datasheet HTML 17Page - STMicroelectronics STA2416 Datasheet HTML 18Page - STMicroelectronics STA2416 Datasheet HTML 19Page - STMicroelectronics STA2416 Datasheet HTML 20Page - STMicroelectronics STA2416 Datasheet HTML 21Page - STMicroelectronics STA2416 Datasheet HTML 22Page - STMicroelectronics STA2416 Datasheet HTML 23Page - STMicroelectronics STA2416 Datasheet HTML 24Page - STMicroelectronics STA2416 Datasheet HTML 25Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 21 / 38 page
background image
STA2416
General specification
21/38
6
General specification
6.1
System clock
The STA2416 works with a single clock provided on the XIN pin. The value of this external
clock should be any integer value from 12 … 33 MHz ±20 ppm (overall).
6.1.1
Slow clock
The slow clock is used by the baseband as reference clock during the low power modes.
The slow clock requires an accuracy of ±250 ppm (overall).
Several options are foreseen in order to adjust the STA2416 behavior according to the
features of the radio used.
If the system clock (for example, 13 MHz) is not provided at all times (power
consumption saving) and no slow clock is provided by the system, a 32 kHz crystal
must be used by the STA2416 (default mode).
If the system clock (for example, 13 MHz) is not provided at all times (power
consumption saving) and the system provides a slow clock at 32 kHz or 3.2 kHz, this
signal is simply connected to the STA2416 (LPO_CLK_P).
If the system clock (for example, 13 MHz) is provided at all times, the STA2416
generates from the reference clock an internal 32 kHz clock. This mode is not an
optimized mode for power consumption.
6.2
Boot procedure
The boot code instructions are the first that ARM7TDMI executes after a HW reset. All the
internal device's registers are set to their default value.
There are two types of boot:
Flash boot
When boot pin is set to ‘1’ (connected to VDD), the STA2416 boots on its flash
UART download boot from ROM
When boot pin is set to ‘0’ (connected to GND), the STA2416 boots on its internal ROM
(needed to download the new firmware in the flash). When booting on the internal
ROM, the STA2416 will monitor the UART interface for approximately 1.4 second. If
there is no request for code downloading during this period, the ROM jumps to flash.
6.3
Clock detection
The STA2416 has an automatic slow clock frequency detection (32kHz, 3.2kHz or none).



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com