Page 10

sensata.com

Copyright © 2025 Sensata Technologies, Inc.

Type

JLE: UL Listed

JLM: UL Listed Mid Trip Construction

JRE: UL Recognized

JREP: UL Recognized above 250 amps

JRM :UL Recognized Mid Trip Construction

JRMP: UL Recognized Mid Trip Construction above 250 amps

JTE: UL Listed Telecom Specication

JTEP: UL Listed Telecom Specication above 250 amps

JTM: UL Listed Telecom Specication Mid Trip Construction

JTMP: UL Listed Telecom Specication Mid Trip Construction above 250 amps

JAE: Non Agency

JAEP: Non Agency above 250 amps

JAM: Non Agency Mid Trip Construction

JAMP: Non Agency Mid Trip Construction above 250 amps

Poles

-1*: Single pole

-2: Two poles

-3: Three poles

-4: Four poles

-5: Five poles

-6: Six poles

*Single pole unit above 250 Amps are supplied as parallel milti-pole assemblies.

The second decision must indicate the physical number of poles.

Internal Conguration

-0: Switch only

-1: Series

-3: Shunt construction***

-4: Relay construction***

-REC4: Auxiliary switch* (STD) .110 quick connect

-REG4: Auxiliary switch* .110 quick connect**

-REC5: Auxiliary switch* (STD) .187 quick connect

-RLS4: Alarm switch* (STD) .110 quick connect

-RLS5: Alarm switch* .187 quick connect

-DAA4: Dual auxiliary & alarm switch* (STD) .110 quick connect

-DAA5: Dual auxiliary & alarm switch* .187 quick connect

* Auxiliary switch located in the left hand pole when viewed from the terminal end. All meter shunt and

parallel pole builds that require an auxiliary switch will automatically get a XXX4 type switch. To connect to

the switch terminals which are brought through the cover use a Molex 02-09-1104 or an Amp 770146-1

crimp terminal.

** Gold Contacts

*** Shunt and Relay construction not available above 250 Amps and not available in UL Listed Breakers

Frequency & Delay

Standard

50: DC instant trip

51: DC short delay Option: 51F

52: DC med. delay Option: 52F

53: DC long delay Option: 53F

60: 50/60Hz instant trip

61: 50/60Hz short delay Option: 61F

62: 50/60Hz med. delay Option: 62F

63: 50/60Hz long delay Option: 63F

SW: Switch only

An F after any delay denotes high pulse tolerance construction

JLM

-

1

-

1REC4

-

51

-

1

-

F1

-

250

-

A

-

V

ORDERING OPTIONS

The ordering code for JAE/JRE/JLE F-Frame Circuit Protectors may be determined by following the steps in the decision tables shown here.

The coding given permits a self-assigning part number for standard configurations. Factory part numbers are assigned to units with mixed ratings,

combinations of styles or construction not listed in the Third Decision Table, etc. With these, it is suggested that order entry be by description and/or

drawings, and a part number will be established.

Additionally, it is standard policy to establish a factory-assigned part number whenever a descriptive drawing exists to ensure cross reference,

traceability and manufacturing control.

For example, the following is the code for a single pole breaker series trip, with mid-trip handle indication, auxiliary switch, short delay, 65 volts DC

maximum voltage rating with 3/8-16 captive nuts in a current rating of 250 amperes and metric inserts.

To determine the ordering number of your particular JAE/JRE/JLE unit, simply follow the steps shown. You may use this number to place an order or

as a reference for further questions you may have.

Example: JLM-1-IREC4-51-1-F1-250-A-V