Page 6

Copyright © 2024 Sensata Technologies, Inc.

www.sensata.com

Encoder

X: Express Encoder

Blank: Standard Leadtime

Type

HS35: Hollow Shaft, 3,5”

Encoder Diameter

Housing Configuration

F: Standard

Shaft Bore

100: 1.00”

87: 0.875”

75: 0.75”

62: 0.625”

50: 0.50” etc.

Metric bores available

Tether

R1: Tether Block and Pin

R2: Tether Arm

Others tether configurations available

Shaft Seal Configuration

SS: Through Shaft, Rubber Seals

Number of Bits

12: 12 Bits, 4096 Counts

13: 13 Bits, 8192 Counts

14: 14 Bits, 16384 Counts

15: 15 Bits, 32768 Counts

16: 16 Bits, 65536 Counts

Code Type

GC: Gray Code

NB: Natural Binary

(* Leave Blank for A1-A5)

Voltage / Output

28/V: 5-28Vin/out

28/5: 5-28Vin/5Vout

28/OC: 5-28Vin/OCout

S3: SSI

A1: 4-20mA

A2: 0-10V

A3: 0-20mA

A4: 0-5V

A5: 0-24mA

Direction of Count

CW: Clockwise Increasing Count

CCW: Counter Clockwise Increasing Count

Output Termination

SM18: MS3102R18-1P

SM14/19: MS3112E14-19P (19 Pin)

SCS: Shielded/Jacketed 20 wires Cable with Cable Seal. Length of Cable is specified in inches. (i.e. SCS18 = 18 inches)

SC3: Shielded/Jacketed 16 wires Cable with Cable Seal. Length of Cable is specified in inches. (i.e. SC318 = 18 inches)

(See Connections Section)

Hazardous Area Ratings

Blank: None

NI: Non-Incendive

Contact factory for voltage options

Special Features

S: Special Features specified on Purchase Order.

–S at the end of the model number is used to define a variety of non-standard features such as hard anodization, special shaft lengths, voltage options, or special testing. Please

consult the factory to discuss your special requirements.

ORDERING OPTIONS

HS35

F

100

12

R1

28V/V

GC

SS

CW

S

X

SM14/19

Items highlighted with this are standard Express Encoders and ship in few days. in North America