5 Parameter Measurement Information

A.

VOHV AND VOLP ARE MEASURED WITH RESPECT TO A GROUND REFERENCE NEAR THE OUTPUT UNDER TEST.

B.

INPUT PULSES HAVE THE FOLLOWING CHARACTERISTICS: PRR ≤ 1 MHz, tr = 3 ns, tf = 3 ns, SKEW 1 ns.

C.

R.F. FIXTURE WITH 700-MHz DESIGN RULES REQUIRED. IC SHOULD BE SOLDERED INTO TEST BOARD ANO BYPASSED

WITH 0.1 μF CAPACITOR. SCOPE AND PROBES REQUIRE 700-MHz BANDWIDTH.

D.

92CS-42406

Figure 5-1. Simultaneous Switching Transient Waveforms.

Figure 5-2. Three-state Propagation Delay Waveforms and Test Circuit.

Figure 5-3. Data to Qn Output Propagation Delays and Output Transition Times.

www.ti.com

CD54AC373, CD74AC373, CD54ACT373, CD74ACT373

SCHS289A – DECEMBER 1998 – REVISED MAY 2024

Copyright © 2024 Texas Instruments Incorporated

Submit Document Feedback

9

Product Folder Links: CD54AC373 CD74AC373 CD54ACT373 CD74ACT373