USB

TRANSCEIVER

USB

CONNECTOR

ESD

PROTECTION

OPTIONAL

PLD

D1P

D1M

CD

ENA_HS

D2P

D2M

Low and Full

Speed Bypass

Status Flags

High Speed

Compensation

CDP Controller

8

TUSB215-Q1

SLLSF07 – SEPTEMBER 2017

www.ti.com

Product Folder Links: TUSB215-Q1

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

7 Detailed Description

7.1 Overview

The TUSB215-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a

transmission channel. TUSB215-Q1 has a patent-pending design which is agnostic to USB Low Speed (LS) and

Full Speed (FS) signals and does not alter their signal characteristics, while HS signals are compensated. In

addition, the design is compatible with USB On-The-Go (OTG) and Battery Charging (BC) specifications. The

TUSB215-Q1 provides USB Charging Downstream Port (CDP) controller for applications in which USB host or

hub do not have this function.

Programmable signal AC boost through an external resistor on EQ pin permits fine tuning device performance to

optimize signals helping to pass USB HS electrical compliance tests at the connector. Additional DC Boost

configurable by three level input DC_BOOST pin helps overcoming the cable losses.

7.2 Functional Block Diagram

7.3 Feature Description

7.3.1 EQ

The EQ pin of the TUSB215-Q1 is used to configure the AC boost of the device. The four levels of AC boost are

set through different values of an external pulldown resistor at this pin.

7.3.2 DC BOOST

The DC_BOOST pin of the TUSB215-Q1 is a tri-level pin, used to set the DC gain of the device according to

Table 1.

Table 1. DC Boost Settings

DC BOOST SETTING VIA PIN STRAP

DC_BOOST

DC Boost Setting (mV)

VIL

40

VIM

60

VIH

80