Page <3>

V1.0

08/05/25

General Purpose Multilayer Ceramic Capacitors

4 to 100V (NP0, X7R, Y5V, X6S, X7S & X5R Dielectrics)

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

sg.element14.com/b/multicomp-pro

General Electrical Data

Dielectric

NP0

X7R

Y5V

X5R

X6S

X7S

Size

0201, 0402, 0603, 0805, 1206, 1210, 1812

Capacitance

range*

0.1pF to 0.1μF

100pF to 47μF

0.01μF to

100μF

100pF to 220μF

0.1μF to 100μF

1μF to 100μF

Capacitance

tolerance**

Cap≤5pF#1:

A (±0.05pF),

B (±0.1pF),

C (±0.25pF)

5pF<Cap<10pF:

C (±0.25pF),

D (±0.5pF)

Cap≥10pF:

F (±1%), G (±2%),

J (±5%), K (±10%)

J (±5%),

K (±10%),

M (±20%)

M (±20%),

Z (-20/+80%)

K (±10%),

M (±20%)

K (±10%),

M (±20%)

K (±10%),

M (±20%)

Rated voltage

(WVDC)

10V, 16V, 25V,

50V,100V

6.3V, 10V, 16V, 25V, 50V, 100V

DF(Tan δ)*

Cap<30pF: Q≥400+20C

Cap≥30pF: Q≥1000

Note 1

Operating

temperature

-55 to +125°C

-25 to +85°C

-55°C to +85°C -55°C to +105°C -55°C to +125°C

Capacitance

Characteristic

±30ppm

±15%

+30/-80%

±15%

±22%

±22%

Termination

Ni/Sn (lead-free termination)

#1: NP0, 0.1pF product only provide B tolerance; 0603N0R3/0R4 provide B&C tolerance.

*Measured at the condition of 30~70% related humidity.

NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient

temperature

X7R/X6S/X5R/X7S: Refer “Reliability test conditions and requirements” details.

Y5V: Apply 1.0±0.2Vrms, 1kHz±10%, at 20°C ambient temperature.

** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for

24±2 hours before measurement.

#1 : For 0603/Cap≧10μF or 0603/Cap≧4.7μF(≦6.3V) or 0603/Cap>1μF(>10V) products.

#2 : For 0201/Cap≧0.68μF products.

#3 : For 0201/Cap≧1μF products.

#4 : For 1210_100V: Cap > 1μF, 250V: Cap >0. 47μF, 400V~630V: Cap >0.22μF.