| 数据搜索系统,热门电子元器件搜索 |
|
STM32F446RC 数据表(PDF) 34 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F446RC 数据表(HTML) 34 Page - STMicroelectronics |
|
34 / 202 page ![]() Functional overview STM32F446xC/E 34/202 DocID027107 Rev 6 3.23 Universal synchronous/asynchronous receiver transmitters (USART) The devices embed four universal synchronous/asynchronous receiver transmitters (USART1, USART2, USART3 and USART6) and four universal asynchronous receiver transmitters (UART4, and UART5). These six interfaces provide asynchronous communication, IrDA SIR ENDEC support, multiprocessor communication mode, single-wire half-duplex communication mode and have LIN Master/Slave capability. The USART1 and USART6 interfaces are able to communicate at speeds of up to 11.25 Mbit/s. The other available interfaces communicate at up to 5.62 bit/s. USART1, USART2, USART3 and USART6 also provide hardware management of the CTS and RTS signals, Smart Card mode (ISO 7816 compliant) and SPI-like communication capability. All interfaces can be served by the DMA controller. 3.24 Serial peripheral interface (SPI) The devices feature up to four SPIs in slave and master modes in full-duplex and simplex communication modes. SPI1, and SPI4 can communicate at up to 45 Mbits/s, SPI2 and SPI3 can communicate at up to 22.5 Mbit/s. The 3-bit prescaler gives 8 master mode frequencies and the frame is configurable to 8 bits or 16 bits. The hardware CRC generation/verification supports basic SD Card/MMC modes. All SPIs can be served by the DMA controller. Table 8. USART feature comparison(1) USART name Standard features Modem (RTS/CTS) LIN SPI maste r irD A Smartcard (ISO 7816) Max. baud rate in Mbit/s (oversamplin g by 16) Max. baud rate in Mbit/s (oversamplin g by 8) APB mapping USART1 X X X X X X 5.62 11.25 APB2 (max. 90 MHz) USART2 X X X X X X 2.81 5.62 APB1 (max. 45 MHz) USART3 X X X X X X 2.81 5.62 APB1 (max. 45 MHz) UART4 X X X - X - 2.81 5.62 APB1 (max. 45 MHz) UART5 X X X - X - 2.81 5.62 APB1 (max. 45 MHz) USART6 X X X X X X 5.62 11.25 APB2 (max. 90 MHz) 1. X = feature supported. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |